lkml.org 
[lkml]   [2019]   [Apr]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH v3] tty: serial: 8250: Fix type field in format string
The dev_dbg statement should print the value of uart.port.mapbase instead
of its address. Besides that, uart.port.irq and uart.port.iotype are all
unsigned types, so using %u is more appropriate.

Signed-off-by: Hao Lee <haolee.swjtu@gmail.com>
---
drivers/tty/serial/8250/8250_pnp.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c
index 431e69a5a6a0..dfca33141fcc 100644
--- a/drivers/tty/serial/8250/8250_pnp.c
+++ b/drivers/tty/serial/8250/8250_pnp.c
@@ -462,8 +462,8 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
return -ENODEV;

dev_dbg(&dev->dev,
- "Setup PNP port: port %lx, mem %pa, irq %d, type %d\n",
- uart.port.iobase, &uart.port.mapbase,
+ "Setup PNP port: port %#lx, mem %#llx, irq %u, type %u\n",
+ uart.port.iobase, (unsigned long long)uart.port.mapbase,
uart.port.irq, uart.port.iotype);

if (flags & CIR_PORT) {
--
2.14.5
\
 
 \ /
  Last update: 2019-04-29 18:25    [W:0.637 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site