lkml.org 
[lkml]   [2019]   [Apr]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/2] Add support for STM32MP1 power regulators
Date
The POWER block of the STM32MP1 integrates 3 fixed regulators with a ready
status bit for each one. The goal of this patchset is to add support those
regulators.

Pascal Paillet (2):
changes in v2:
* add COMPILE_TEST switch
* do not test ready in is_enabled() callback
* remove of_regulator_match
* change author

dt-bindings: regulator: Add stm32mp1 pwr regulators
regulator: Add support for stm32 power regulators

.../bindings/regulator/st,stm32mp1-pwr-reg.txt | 43 +++++
drivers/regulator/Kconfig | 7 +
drivers/regulator/Makefile | 1 +
drivers/regulator/stm32-pwr.c | 190 +++++++++++++++++++++
4 files changed, 241 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.txt
create mode 100644 drivers/regulator/stm32-pwr.c

--
1.9.1

\
 
 \ /
  Last update: 2019-04-15 11:17    [W:0.044 / U:4.420 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site