lkml.org 
[lkml]   [2019]   [Mar]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/6] test_sysctl: add proc_do_large_bitmap() test case
Date
From: Eric Sandeen <sandeen@sandeen.net>

The kernel has only two users of proc_do_large_bitmap(), the kernel
CPU watchdog, and the ip_local_reserved_ports. Refer to watchdog_cpumask
and ip_local_reserved_ports in Documentation for further details on
these. When you input a large buffer into these, when it is larger than
PAGE_SIZE - 1, the input data gets misparsed, and the user get
incorrectly informed that the desired input value was set. This commit
implements a test which mimics and exploits that use case, it uses a
bitmap size, as in the watchdog case. The bitmap is used to test the
bitmap proc handler, proc_do_large_bitmap().

The next commit fixes this issue.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
[mcgrof: use new target description for backward compatibility]
[mcgrof: augment test number to 50, ran into issues with bash
string comparisons when testing up to 50 cases.]
[mcgrof: introduce and use verify_diff_proc_file() to use diff]
[mcgrof: use mktemp for tmp file]
[mcgrof: merge shell test and C code]
[mcgrof: commit log love]
[mcgrof: export proc_do_large_bitmap() to allow for the test
[mcgrof: check for the return value when writing to the proc file]
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
---
kernel/sysctl.c | 1 +
lib/test_sysctl.c | 18 +++++-
tools/testing/selftests/sysctl/sysctl.sh | 81 +++++++++++++++++++++++-
3 files changed, 97 insertions(+), 3 deletions(-)

diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index b3df3ab7ac28..e1a8d785b839 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -3263,6 +3263,7 @@ int proc_do_large_bitmap(struct ctl_table *table, int write,
kfree(tmp_bitmap);
return err;
}
+EXPORT_SYMBOL_GPL(proc_do_large_bitmap);

#else /* CONFIG_PROC_SYSCTL */

diff --git a/lib/test_sysctl.c b/lib/test_sysctl.c
index 3dd801c1c85b..566dad3f4196 100644
--- a/lib/test_sysctl.c
+++ b/lib/test_sysctl.c
@@ -47,6 +47,9 @@ struct test_sysctl_data {
unsigned int uint_0001;

char string_0001[65];
+
+#define SYSCTL_TEST_BITMAP_SIZE 65536
+ unsigned long *bitmap_0001;
};

static struct test_sysctl_data test_data = {
@@ -102,6 +105,13 @@ static struct ctl_table test_table[] = {
.mode = 0644,
.proc_handler = proc_dostring,
},
+ {
+ .procname = "bitmap_0001",
+ .data = &test_data.bitmap_0001,
+ .maxlen = SYSCTL_TEST_BITMAP_SIZE,
+ .mode = 0644,
+ .proc_handler = proc_do_large_bitmap,
+ },
{ }
};

@@ -129,15 +139,21 @@ static struct ctl_table_header *test_sysctl_header;

static int __init test_sysctl_init(void)
{
+ test_data.bitmap_0001 = kzalloc(SYSCTL_TEST_BITMAP_SIZE/8, GFP_KERNEL);
+ if (!test_data.bitmap_0001)
+ return -ENOMEM;
test_sysctl_header = register_sysctl_table(test_sysctl_root_table);
- if (!test_sysctl_header)
+ if (!test_sysctl_header) {
+ kfree(test_data.bitmap_0001);
return -ENOMEM;
+ }
return 0;
}
late_initcall(test_sysctl_init);

static void __exit test_sysctl_exit(void)
{
+ kfree(test_data.bitmap_0001);
if (test_sysctl_header)
unregister_sysctl_table(test_sysctl_header);
}
diff --git a/tools/testing/selftests/sysctl/sysctl.sh b/tools/testing/selftests/sysctl/sysctl.sh
index 4eb019068e24..6a970b127c9b 100755
--- a/tools/testing/selftests/sysctl/sysctl.sh
+++ b/tools/testing/selftests/sysctl/sysctl.sh
@@ -38,6 +38,7 @@ ALL_TESTS="$ALL_TESTS 0002:1:1:string_0001"
ALL_TESTS="$ALL_TESTS 0003:1:1:int_0002"
ALL_TESTS="$ALL_TESTS 0004:1:1:uint_0001"
ALL_TESTS="$ALL_TESTS 0005:3:1:int_0003"
+ALL_TESTS="$ALL_TESTS 0006:50:1:bitmap_0001"

test_modprobe()
{
@@ -150,6 +151,9 @@ reset_vals()
string_0001)
VAL="(none)"
;;
+ bitmap_0001)
+ VAL=""
+ ;;
*)
;;
esac
@@ -180,6 +184,22 @@ verify()
return 0
}

+# proc files get read a page at a time, which can confuse diff,
+# and get you incorrect results on proc files with long data. To use
+# diff against them you must first extract the output to a file, and
+# then compare against that file.
+verify_diff_proc_file()
+{
+ TMP_DUMP_FILE=$(mktemp)
+ cat $1 > $TMP_DUMP_FILE
+
+ if ! diff -w -q $TMP_DUMP_FILE $2; then
+ return 1
+ else
+ return 0
+ fi
+}
+
verify_diff_w()
{
echo "$TEST_STR" | diff -q -w -u - $1 > /dev/null
@@ -615,6 +635,55 @@ target_exists()
return 1
}

+run_bitmaptest() {
+ # Total length of bitmaps string to use, a bit under
+ # the maximum input size of the test node
+ LENGTH=$((RANDOM % 65000))
+
+ # First bit to set
+ BIT=$((RANDOM % 1024))
+
+ # String containing our list of bits to set
+ TEST_STR=$BIT
+
+ # build up the string
+ while [ "${#TEST_STR}" -le "$LENGTH" ]; do
+ # Make sure next entry is discontiguous,
+ # skip ahead at least 2
+ BIT=$((BIT + $((2 + RANDOM % 10))))
+
+ # Add new bit to the list
+ TEST_STR="${TEST_STR},${BIT}"
+
+ # Randomly make it a range
+ if [ "$((RANDOM % 2))" -eq "1" ]; then
+ RANGE_END=$((BIT + $((1 + RANDOM % 10))))
+ TEST_STR="${TEST_STR}-${RANGE_END}"
+ BIT=$RANGE_END
+ fi
+ done
+
+ echo -n "Checking bitmap handler... "
+ TEST_FILE=$(mktemp)
+ echo -n "$TEST_STR" > $TEST_FILE
+
+ cat $TEST_FILE > $TARGET 2> /dev/null
+ if [ $? -ne 0 ]; then
+ echo "FAIL" >&2
+ rc=1
+ test_rc
+ fi
+
+ if ! verify_diff_proc_file "$TARGET" "$TEST_FILE"; then
+ echo "FAIL" >&2
+ rc=1
+ else
+ echo "ok"
+ rc=0
+ fi
+ test_rc
+}
+
sysctl_test_0001()
{
TARGET="${SYSCTL}/$(get_test_target 0001)"
@@ -675,6 +744,14 @@ sysctl_test_0005()
run_limit_digit_int_array
}

+sysctl_test_0006()
+{
+ TARGET="${SYSCTL}/bitmap_0001"
+ reset_vals
+ ORIG=""
+ run_bitmaptest
+}
+
list_tests()
{
echo "Test ID list:"
@@ -688,6 +765,7 @@ list_tests()
echo "0003 x $(get_test_count 0003) - tests proc_dointvec()"
echo "0004 x $(get_test_count 0004) - tests proc_douintvec()"
echo "0005 x $(get_test_count 0005) - tests proc_douintvec() array"
+ echo "0006 x $(get_test_count 0006) - tests proc_do_large_bitmap()"
}

usage()
@@ -761,8 +839,7 @@ function run_all_tests()
ENABLED=$(get_test_enabled $TEST_ID)
TEST_COUNT=$(get_test_count $TEST_ID)
TEST_TARGET=$(get_test_target $TEST_ID)
- target_exists $TEST_TARGET $TEST_ID
- if [ $? -ne 1 ]; then
+ if target_exists $TEST_TARGET $TEST_ID; then
continue
fi
if [[ $ENABLED -eq "1" ]]; then
--
2.18.0
\
 
 \ /
  Last update: 2019-03-20 23:29    [W:0.119 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site