lkml.org 
[lkml]   [2019]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] platform/x86: Add support for Basin Cove power button
Date
This provides a new input driver for supporting the power button on
Basin Cove PMIC, found on Intel Merrifield-based devices.

The driver follows the design used in intel_chtdc_ti_pwrbtn.c module.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/platform/x86/Kconfig | 11 +++
drivers/platform/x86/Makefile | 1 +
drivers/platform/x86/intel_mrfld_pwrbtn.c | 107 ++++++++++++++++++++++
3 files changed, 119 insertions(+)
create mode 100644 drivers/platform/x86/intel_mrfld_pwrbtn.c

diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index a1ed13183559..85b92a95e4c8 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -1263,6 +1263,17 @@ config INTEL_CHTDC_TI_PWRBTN
To compile this driver as a module, choose M here: the module
will be called intel_chtdc_ti_pwrbtn.

+config INTEL_MRFLD_PWRBTN
+ tristate "Intel Merrifield Basin Cove power button driver"
+ depends on INTEL_SOC_PMIC_MRFLD
+ depends on INPUT
+ ---help---
+ This option adds a power button driver for Basin Cove PMIC
+ on Intel Merrifield devices.
+
+ To compile this driver as a module, choose M here: the module
+ will be called intel_mrfld_pwrbtn.
+
config I2C_MULTI_INSTANTIATE
tristate "I2C multi instantiate pseudo device driver"
depends on I2C && ACPI
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index 86cb76677bc8..87b0069bd781 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -94,6 +94,7 @@ obj-$(CONFIG_PMC_ATOM) += pmc_atom.o
obj-$(CONFIG_MLX_PLATFORM) += mlx-platform.o
obj-$(CONFIG_INTEL_TURBO_MAX_3) += intel_turbo_max_3.o
obj-$(CONFIG_INTEL_CHTDC_TI_PWRBTN) += intel_chtdc_ti_pwrbtn.o
+obj-$(CONFIG_INTEL_MRFLD_PWRBTN) += intel_mrfld_pwrbtn.o
obj-$(CONFIG_I2C_MULTI_INSTANTIATE) += i2c-multi-instantiate.o
obj-$(CONFIG_INTEL_ATOMISP2_PM) += intel_atomisp2_pm.o
obj-$(CONFIG_PCENGINES_APU2) += pcengines-apuv2.o
diff --git a/drivers/platform/x86/intel_mrfld_pwrbtn.c b/drivers/platform/x86/intel_mrfld_pwrbtn.c
new file mode 100644
index 000000000000..d58fea51747e
--- /dev/null
+++ b/drivers/platform/x86/intel_mrfld_pwrbtn.c
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Power-button driver for Basin Cove PMIC
+ *
+ * Copyright (c) 2019, Intel Corporation.
+ * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ */
+
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/mfd/intel_soc_pmic_mrfld.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_wakeirq.h>
+#include <linux/slab.h>
+
+#define BCOVE_PBSTATUS 0x27
+#define BCOVE_PBSTATUS_PBLVL BIT(4) /* 1 - release, 0 - press */
+
+static irqreturn_t mrfld_pwrbtn_interrupt(int irq, void *dev_id)
+{
+ struct input_dev *input = dev_id;
+ struct device *dev = input->dev.parent;
+ struct regmap *regmap = dev_get_drvdata(dev);
+ unsigned int state;
+ int ret;
+
+ ret = regmap_read(regmap, BCOVE_PBSTATUS, &state);
+ if (ret)
+ return IRQ_NONE;
+
+ dev_dbg(dev, "PBSTATUS=0x%x\n", state);
+ input_report_key(input, KEY_POWER, !(state & BCOVE_PBSTATUS_PBLVL));
+ input_sync(input);
+
+ regmap_update_bits(regmap, BCOVE_MIRQLVL1, BCOVE_LVL1_PWRBTN, 0);
+ return IRQ_HANDLED;
+}
+
+static int mrfld_pwrbtn_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct intel_soc_pmic *pmic = dev_get_drvdata(dev->parent);
+ struct input_dev *input;
+ int irq, ret;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ input = devm_input_allocate_device(dev);
+ if (!input)
+ return -ENOMEM;
+ input->name = pdev->name;
+ input->phys = "power-button/input0";
+ input->id.bustype = BUS_HOST;
+ input->dev.parent = dev;
+ input_set_capability(input, EV_KEY, KEY_POWER);
+ ret = input_register_device(input);
+ if (ret)
+ return ret;
+
+ dev_set_drvdata(dev, pmic->regmap);
+
+ ret = devm_request_threaded_irq(dev, irq, NULL, mrfld_pwrbtn_interrupt,
+ IRQF_ONESHOT | IRQF_SHARED, pdev->name,
+ input);
+ if (ret)
+ return ret;
+
+ regmap_update_bits(pmic->regmap, BCOVE_MIRQLVL1, BCOVE_LVL1_PWRBTN, 0);
+ regmap_update_bits(pmic->regmap, BCOVE_MPBIRQ, BCOVE_PBIRQ_PBTN, 0);
+
+ device_init_wakeup(dev, true);
+ dev_pm_set_wake_irq(dev, irq);
+ return 0;
+}
+
+static int mrfld_pwrbtn_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+
+ dev_pm_clear_wake_irq(dev);
+ device_init_wakeup(dev, false);
+ return 0;
+}
+
+static const struct platform_device_id mrfld_pwrbtn_id_table[] = {
+ { .name = "mrfld_bcove_pwrbtn" },
+ {}
+};
+MODULE_DEVICE_TABLE(platform, mrfld_pwrbtn_id_table);
+
+static struct platform_driver mrfld_pwrbtn_driver = {
+ .driver = {
+ .name = "mrfld_bcove_pwrbtn",
+ },
+ .probe = mrfld_pwrbtn_probe,
+ .remove = mrfld_pwrbtn_remove,
+ .id_table = mrfld_pwrbtn_id_table,
+};
+module_platform_driver(mrfld_pwrbtn_driver);
+
+MODULE_DESCRIPTION("Power-button driver for Basin Cove PMIC");
+MODULE_LICENSE("GPL v2");
--
2.20.1
\
 
 \ /
  Last update: 2019-03-19 12:01    [W:1.320 / U:0.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site