Messages in this thread | | | Subject | Re: [PATCH 4/4] leds: lm3532: Introduce the lm3532 LED driver | From | Jacek Anaszewski <> | Date | Sun, 10 Mar 2019 20:49:14 +0100 |
| |
Hi Dan,
Thank your for the patch.
I have some comments below, please take a look.
On 3/7/19 11:09 PM, Dan Murphy wrote: > Introduce the Texas Instruments LM3532 White LED driver. > The driver supports ALS configurability or manual brightness > control. > > The driver also supports associating LED strings with specific > control banks in a group or as individually controlled strings. > > Signed-off-by: Dan Murphy <dmurphy@ti.com> > --- > drivers/leds/Kconfig | 10 + > drivers/leds/Makefile | 1 + > drivers/leds/leds-lm3532.c | 595 +++++++++++++++++++++++++ > include/dt-bindings/leds/leds-lm3532.h | 72 +++ > 4 files changed, 678 insertions(+) > create mode 100644 drivers/leds/leds-lm3532.c > create mode 100644 include/dt-bindings/leds/leds-lm3532.h > > diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig > index a72f97fca57b..da00b9ed5a5c 100644 > --- a/drivers/leds/Kconfig > +++ b/drivers/leds/Kconfig > @@ -138,6 +138,16 @@ config LEDS_LM3530 > controlled manually or using PWM input or using ambient > light automatically. > > +config LEDS_LM3532 > + tristate "LCD Backlight driver for LM3532" > + depends on LEDS_CLASS > + depends on I2C > + help > + This option enables support for the LCD backlight using > + LM3532 ambient light sensor chip. This ALS chip can be > + controlled manually or using PWM input or using ambient > + light automatically. > + > config LEDS_LM3533 > tristate "LED support for LM3533" > depends on LEDS_CLASS > diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile > index 4c1b0054f379..7a8b1f55d459 100644 > --- a/drivers/leds/Makefile > +++ b/drivers/leds/Makefile > @@ -18,6 +18,7 @@ obj-$(CONFIG_LEDS_BD2802) += leds-bd2802.o > obj-$(CONFIG_LEDS_CPCAP) += leds-cpcap.o > obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o > obj-$(CONFIG_LEDS_LM3530) += leds-lm3530.o > +obj-$(CONFIG_LEDS_LM3532) += leds-lm3532.o > obj-$(CONFIG_LEDS_LM3533) += leds-lm3533.o > obj-$(CONFIG_LEDS_LM3642) += leds-lm3642.o > obj-$(CONFIG_LEDS_MIKROTIK_RB532) += leds-rb532.o > diff --git a/drivers/leds/leds-lm3532.c b/drivers/leds/leds-lm3532.c > new file mode 100644 > index 000000000000..005478359d06 > --- /dev/null > +++ b/drivers/leds/leds-lm3532.c > @@ -0,0 +1,595 @@ > +// SPDX-License-Identifier: GPL-2.0 > +// TI LM3532 LED driver > +// Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ > + > +#include <linux/i2c.h> > +#include <linux/leds.h> > +#include <linux/slab.h> > +#include <linux/regmap.h> > +#include <linux/input.h> > +#include <linux/types.h> > +#include <linux/regulator/consumer.h> > +#include <linux/module.h> > +#include <uapi/linux/uleds.h> > +#include <linux/gpio/consumer.h> > + > +#include <dt-bindings/leds/leds-lm3532.h> > + > +#define LM3532_NAME "lm3532-led" > + > +#define LM3532_REG_OUTPUT_CFG 0x10 > +#define LM3532_REG_STARTSHUT_RAMP 0x11 > +#define LM3532_REG_RT_RAMP 0x12 > +#define LM3532_REG_PWM_A_CFG 0x13 > +#define LM3532_REG_PWM_B_CFG 0x14 > +#define LM3532_REG_PWM_C_CFG 0x15 > +#define LM3532_REG_ZONE_CFG_A 0x16 > +#define LM3532_REG_CTRL_A_BRT 0x17 > +#define LM3532_REG_ZONE_CFG_B 0x18 > +#define LM3532_REG_CTRL_B_BRT 0x19 > +#define LM3532_REG_ZONE_CFG_C 0x1a > +#define LM3532_REG_CTRL_C_BRT 0x1b > +#define LM3532_REG_ENABLE 0x1d > +#define LM3532_ALS_CONFIG 0x23 > +#define LM3532_REG_ZN_0_HI 0x60 > +#define LM3532_REG_ZN_0_LO 0x61 > +#define LM3532_REG_ZN_1_HI 0x62 > +#define LM3532_REG_ZN_1_LO 0x63 > +#define LM3532_REG_ZN_2_HI 0x64 > +#define LM3532_REG_ZN_2_LO 0x65 > +#define LM3532_REG_ZN_3_HI 0x66 > +#define LM3532_REG_ZN_3_LO 0x67 > +#define LM3532_REG_MAX 0x7e > + > +/* Contorl Enable */ > +#define LM3532_CTRL_A_ENABLE BIT(0) > +#define LM3532_CTRL_B_ENABLE BIT(1) > +#define LM3532_CTRL_C_ENABLE BIT(2) > + > +/* PWM Zone Control */ > +#define LM3532_PWM_ZONE_MASK 0x7c > +#define LM3532_PWM_ZONE_0_EN BIT(2) > +#define LM3532_PWM_ZONE_1_EN BIT(3) > +#define LM3532_PWM_ZONE_2_EN BIT(4) > +#define LM3532_PWM_ZONE_3_EN BIT(5) > +#define LM3532_PWM_ZONE_4_EN BIT(6) > + > +/* Brightness Configuration */ > +#define LM3532_I2C_CTRL BIT(0) > +#define LM3532_LINEAR_MAP BIT(1) > +#define LM3532_ZONE_MASK (BIT(2) | BIT(3) | BIT(4)) > +#define LM3532_ZONE_0 0 > +#define LM3532_ZONE_1 BIT(2) > +#define LM3532_ZONE_2 BIT(3) > +#define LM3532_ZONE_3 (BIT(2) | BIT(3)) > +#define LM3532_ZONE_4 BIT(4) > + > +#define LM3532_ENABLE_ALS BIT(3) > +#define LM3532_ALS_SEL_SHIFT 6 > + > +/* Zone Boundary Register */ > +#define LM3532_ALS_WINDOW_mV 2000 > +#define LM3532_ALS_ZB_MAX 4 > +#define LM3532_ALS_OFFSET_mV 2 > + > +#define LM3532_CONTROL_A 0 > +#define LM3532_CONTROL_B 1 > +#define LM3532_CONTROL_C 2 > +#define LM3532_MAX_CONTROL_BANKS 3 > +#define LM3532_MAX_LED_STRINGS 3 > + > +#define LM3532_OUTPUT_CFG_MASK 0x3 > +#define LM3532_BRT_VAL_ADJUST 8 > +#define LM3532_RAMP_DOWN_SHIFT 3 > + > +/* > + * struct lm3532_als_data > + * @config - value of ALS configuration register > + * @als1_imp_sel - value of ALS1 resistor select register > + * @als2_imp_sel - value of ALS2 resistor select register > + * @als_avrg_time - ALS averaging time > + * @als_input_mode - ALS input mode for brightness control > + * @als_vmin - Minimum ALS voltage > + * @als_vmax - Maximum ALS voltage > + * @zone_lo - values of ALS lo ZB(Zone Boundary) registers > + * @zone_hi - values of ALS hi ZB(Zone Boundary) registers > + */ > +struct lm3532_als_data { > + u8 config; > + u8 als1_imp_sel; > + u8 als2_imp_sel; > + u8 als_avrg_time; > + u8 als_input_mode; > + u32 als_vmin; > + u32 als_vmax; > + u8 zones_lo[LM3532_ALS_ZB_MAX]; > + u8 zones_hi[LM3532_ALS_ZB_MAX]; > +}; > + > +/** > + * struct lm3532_led > + * @led_dev: led class device > + * @priv - Pointer the device data structure > + * @control_bank - Control bank the LED is associated to > + * @mode - Mode of the LED string > + * @num_leds - Number of LED strings are supported in this array > + * @led_strings - The LED strings supported in this array > + * @label - LED label > + */ > +struct lm3532_led { > + struct led_classdev led_dev; > + struct lm3532_data *priv; > + > + int control_bank; > + int mode; > + int num_leds; > + u32 led_strings[LM3532_MAX_CONTROL_BANKS]; > + char label[LED_MAX_NAME_SIZE]; > +}; > + > +/** > + * struct lm3532_data > + * @enable_gpio - Hardware enable gpio > + * @regulator: regulator > + * @client: i2c client > + * @regmap - Devices register map > + * @dev - Pointer to the devices device struct > + * @lock - Lock for reading/writing the device > + * @als_data - Pointer to the als data struct > + * @runtime_ramp_up - Runtime ramp up setting > + * @runtime_ramp_down - Runtime ramp down setting > + * @leds - Array of LED strings > + */ > +struct lm3532_data { > + struct gpio_desc *enable_gpio; > + struct regulator *regulator; > + struct i2c_client *client; > + struct regmap *regmap; > + struct device *dev; > + struct mutex lock; > + > + struct lm3532_als_data *als_data; > + > + u32 runtime_ramp_up; > + u32 runtime_ramp_down; > + > + struct lm3532_led leds[]; > +}; > + > +static const struct reg_default lm3532_reg_defs[] = { > + {LM3532_REG_OUTPUT_CFG, 0xe4}, > + {LM3532_REG_STARTSHUT_RAMP, 0xc0}, > + {LM3532_REG_RT_RAMP, 0xc0}, > + {LM3532_REG_PWM_A_CFG, 0x82}, > + {LM3532_REG_PWM_B_CFG, 0x82}, > + {LM3532_REG_PWM_C_CFG, 0x82}, > + {LM3532_REG_ZONE_CFG_A, 0xf1}, > + {LM3532_REG_CTRL_A_BRT, 0xf3}, > + {LM3532_REG_ZONE_CFG_B, 0xf1}, > + {LM3532_REG_CTRL_B_BRT, 0xf3}, > + {LM3532_REG_ZONE_CFG_C, 0xf1}, > + {LM3532_REG_CTRL_C_BRT, 0xf3}, > + {LM3532_REG_ENABLE, 0xf8}, > + {LM3532_ALS_CONFIG, 0x44}, > + {LM3532_REG_ZN_0_HI, 0x35}, > + {LM3532_REG_ZN_0_LO, 0x33}, > + {LM3532_REG_ZN_1_HI, 0x6a}, > + {LM3532_REG_ZN_1_LO, 0x66}, > + {LM3532_REG_ZN_2_HI, 0xa1}, > + {LM3532_REG_ZN_2_LO, 0x99}, > + {LM3532_REG_ZN_3_HI, 0xdc}, > + {LM3532_REG_ZN_3_LO, 0xcc}, > +}; > + > +static const struct regmap_config lm3532_regmap_config = { > + .reg_bits = 8, > + .val_bits = 8, > + > + .max_register = LM3532_REG_MAX, > + .reg_defaults = lm3532_reg_defs, > + .num_reg_defaults = ARRAY_SIZE(lm3532_reg_defs), > + .cache_type = REGCACHE_FLAT, > +}; > + > +static int lm3532_led_enable(struct lm3532_led *led_data) > +{ > + int ctrl_en_val; > + int ret; > + > + switch (led_data->control_bank) { > + case LM3532_CONTROL_A: > + ctrl_en_val = LM3532_CTRL_A_ENABLE; > + break; > + case LM3532_CONTROL_B: > + ctrl_en_val = LM3532_CTRL_B_ENABLE; > + break; > + case LM3532_CONTROL_C: > + ctrl_en_val = LM3532_CTRL_C_ENABLE; > + break; > + default: > + dev_err(led_data->priv->dev, "Invalid control bank\n");
If control_bank was validated in lm3532_parse_node(), then you wouldn't have to take into account this option here.
Besides, you don't need this switch statement, but can easily calculate ctrl_en_val:
#define LM3532_GET_CTRL_BANK_EN_VAL(bank_id) BIT(bank_id)
> + return -EINVAL; > + }; > + > + ret = regmap_update_bits(led_data->priv->regmap, LM3532_REG_ENABLE, > + ctrl_en_val, ctrl_en_val); > + if (ret) { > + dev_err(led_data->priv->dev, "Failed to set ctrl:%d\n", ret); > + return ret; > + } > + > + return regulator_enable(led_data->priv->regulator); > +} > + > +static int lm3532_led_disable(struct lm3532_led *led_data) > +{ > + int ctrl_en_val; > + int ret; > + > + switch (led_data->control_bank) { > + case LM3532_CONTROL_A: > + ctrl_en_val = LM3532_CTRL_A_ENABLE; > + break; > + case LM3532_CONTROL_B: > + ctrl_en_val = LM3532_CTRL_B_ENABLE; > + break; > + case LM3532_CONTROL_C: > + ctrl_en_val = LM3532_CTRL_C_ENABLE; > + break; > + default: > + dev_err(led_data->priv->dev, "Invalid control bank\n"); > + return -EINVAL; > + };
Ditto.
> + > + ret = regmap_update_bits(led_data->priv->regmap, LM3532_REG_ENABLE, > + ctrl_en_val, ~ctrl_en_val); > + if (ret) { > + dev_err(led_data->priv->dev, "Failed to set ctrl:%d\n", ret); > + return ret; > + } > + > + return regulator_disable(led_data->priv->regulator); > +} > + > +static int lm3532_brightness_set(struct led_classdev *led_cdev, > + enum led_brightness brt_val) > +{ > + struct lm3532_led *led = > + container_of(led_cdev, struct lm3532_led, led_dev); > + u8 brightnes_reg; > + int ret; > + > + mutex_lock(&led->priv->lock); > + > + if (led->mode == LM3532_BL_MODE_ALS) { > + ret = 0; > + goto unlock; > + } > + > + switch (led->control_bank) { > + case LM3532_CONTROL_A: > + brightnes_reg = LM3532_REG_CTRL_A_BRT; > + break; > + case LM3532_CONTROL_B: > + brightnes_reg = LM3532_REG_CTRL_B_BRT; > + break; > + case LM3532_CONTROL_C: > + brightnes_reg = LM3532_REG_CTRL_C_BRT; > + break; > + default: > + dev_err(led->priv->dev, "Invalid control bank\n"); > + ret = -EINVAL; > + goto unlock; > + };
Similarly here. use following macro:
#define LM3532_GET_CTRL_BANK_BRT_REG (bank_id) BIT((LM3532_REG_CTRL_A_BRT + bank_id*2))
> + if (brt_val == LED_OFF) { > + ret = lm3532_led_disable(led); > + goto unlock; > + } > + > + lm3532_led_enable(led); > + brt_val = brt_val / LM3532_BRT_VAL_ADJUST; > + > + ret = regmap_write(led->priv->regmap, brightnes_reg, brt_val); > + > +unlock: > + mutex_unlock(&led->priv->lock); > + return ret; > +} > + > +static int lm3532_init_registers(struct lm3532_led *led) > +{ > + struct lm3532_data *drvdata = led->priv; > + unsigned int runtime_ramp_val; > + unsigned int output_cfg_val = 0; > + unsigned int output_cfg_shift = 0; > + unsigned int output_cfg_mask = 0; > + int ret, i; > + > + for (i = 0; i < led->num_leds; i++) { > + output_cfg_shift = led->led_strings[i] * 2; > + output_cfg_val |= (led->control_bank << output_cfg_shift); > + output_cfg_mask |= LM3532_OUTPUT_CFG_MASK << output_cfg_shift; > + } > + > + ret = regmap_update_bits(drvdata->regmap, LM3532_REG_OUTPUT_CFG, > + output_cfg_mask, output_cfg_val); > + > + runtime_ramp_val = drvdata->runtime_ramp_up | > + (drvdata->runtime_ramp_down << LM3532_RAMP_DOWN_SHIFT); > + > + return regmap_write(drvdata->regmap, LM3532_REG_RT_RAMP, > + runtime_ramp_val); > +} > + > +static int lm3532_als_configure(struct lm3532_data *priv) > +{ > + struct lm3532_als_data *als = priv->als_data; > + u32 als_vmin, als_vmax, als_vstep; > + int zone_reg = LM3532_REG_ZN_0_HI; > + int ret; > + int i; > + > + als_vmin = als->als_vmin; > + als_vmax = als->als_vmax; > + > + als_vstep = (als_vmax - als_vmin) / ((LM3532_ALS_ZB_MAX + 1) * 2); > + > + for (i = 0; i < LM3532_ALS_ZB_MAX; i++) { > + als->zones_lo[i] = ((als_vmin + als_vstep + (i * als_vstep)) * > + LED_FULL) / 1000; > + als->zones_hi[i] = ((als_vmin + LM3532_ALS_OFFSET_mV + > + als_vstep + (i * als_vstep)) * LED_FULL) / 1000; > + > + zone_reg = LM3532_REG_ZN_0_HI + i * 2; > + ret = regmap_write(priv->regmap, zone_reg, als->zones_lo[i]); > + if (ret) > + return ret; > + > + zone_reg += 1; > + ret = regmap_write(priv->regmap, zone_reg, als->zones_hi[i]); > + if (ret) > + return ret; > + } > + > + als->config = (als->als_avrg_time | (LM3532_ENABLE_ALS) | > + (als->als_input_mode << LM3532_ALS_SEL_SHIFT)); > + > + return regmap_write(priv->regmap, LM3532_ALS_CONFIG, als->config); > +} > + > +static int lm3532_parse_als(struct lm3532_data *priv) > +{ > + struct lm3532_als_data *als; > + int ret; > + > + als = devm_kzalloc(priv->dev, sizeof(*als), GFP_KERNEL); > + if (als == NULL) > + return -ENOMEM; > + > + ret = device_property_read_u32(&priv->client->dev, "als-vmin", > + &als->als_vmin); > + if (ret) > + als->als_vmin = 0; > + > + ret = device_property_read_u32(&priv->client->dev, "als-vmax", > + &als->als_vmax); > + if (ret) > + als->als_vmax = LM3532_ALS_WINDOW_mV; > + > + ret = device_property_read_u8(&priv->client->dev, "als1-imp-sel", > + &als->als1_imp_sel); > + if (ret) > + als->als1_imp_sel = 0; > + > + ret = device_property_read_u8(&priv->client->dev, "als2-imp-sel", > + &als->als2_imp_sel); > + if (ret) > + als->als2_imp_sel = 0; > + > + ret = device_property_read_u8(&priv->client->dev, "als-avrg-time", > + &als->als_avrg_time); > + if (ret) > + als->als_avrg_time = 0; > + > + ret = device_property_read_u8(&priv->client->dev, "als-input-mode", > + &als->als_input_mode); > + if (ret) > + als->als_input_mode = 0; > + > + priv->als_data = als; > + > + return ret; > +} > + > +static int lm3532_parse_node(struct lm3532_data *priv) > +{ > + struct fwnode_handle *child = NULL; > + struct lm3532_led *led; > + const char *name; > + int control_bank; > + size_t i = 0; > + int ret; > + > + priv->enable_gpio = devm_gpiod_get_optional(&priv->client->dev, > + "enable", GPIOD_OUT_LOW); > + if (IS_ERR(priv->enable_gpio)) > + priv->enable_gpio = NULL; > + > + priv->regulator = devm_regulator_get(&priv->client->dev, "vin"); > + if (IS_ERR(priv->regulator)) > + priv->regulator = NULL; > + > + ret = device_property_read_u32(&priv->client->dev, "ramp-down-ms", > + &priv->runtime_ramp_up); > + if (ret) > + dev_info(&priv->client->dev, "ramp-down-ms property missing\n"); > + > + ret = device_property_read_u32(&priv->client->dev, "ramp-down-ms", > + &priv->runtime_ramp_down); > + if (ret) > + dev_info(&priv->client->dev, "ramp-down-ms property missing\n"); > + > + device_for_each_child_node(priv->dev, child) { > + led = &priv->leds[i]; > + > + ret = fwnode_property_read_u32(child, "reg", &control_bank); > + if (ret) { > + dev_err(&priv->client->dev, "reg property missing\n"); > + fwnode_handle_put(child); > + goto child_out; > + } > + > + if (control_bank > LM3532_CONTROL_C) { > + dev_err(&priv->client->dev, "Control bank invalid\n"); > + continue; > + } > + > + led->control_bank = control_bank; > + > + ret = fwnode_property_read_u32(child, "ti,led-mode", > + &led->mode); > + if (ret) { > + dev_err(&priv->client->dev, "ti,led-mode property missing\n"); > + fwnode_handle_put(child); > + goto child_out; > + } > + > + if (led->mode == LM3532_BL_MODE_ALS) { > + ret = lm3532_parse_als(priv); > + if (ret) > + dev_err(&priv->client->dev, "Failed to parse als\n"); > + else > + lm3532_als_configure(priv); > + } > + > + led->num_leds = fwnode_property_read_u32_array(child, > + "led-sources", > + NULL, 0); > + > + if (led->num_leds > LM3532_MAX_LED_STRINGS) { > + dev_err(&priv->client->dev, "To many LED string defined\n"); > + continue; > + } > + > + ret = fwnode_property_read_u32_array(child, "led-sources", > + led->led_strings, > + led->num_leds); > + if (ret) { > + dev_err(&priv->client->dev, "led-sources property missing\n"); > + fwnode_handle_put(child); > + goto child_out; > + } > + > + fwnode_property_read_string(child, "linux,default-trigger", > + &led->led_dev.default_trigger); > + > + ret = fwnode_property_read_string(child, "label", &name); > + if (ret) > + snprintf(led->label, sizeof(led->label), > + "%s::", priv->client->name); > + else > + snprintf(led->label, sizeof(led->label), > + "%s:%s", priv->client->name, name); > + > + led->priv = priv; > + led->led_dev.name = led->label; > + led->led_dev.brightness_set_blocking = lm3532_brightness_set; > + > + ret = devm_led_classdev_register(priv->dev, &led->led_dev); > + if (ret) { > + dev_err(&priv->client->dev, "led register err: %d\n", > + ret); > + fwnode_handle_put(child); > + goto child_out; > + } > + > + lm3532_init_registers(led); > + > + i++; > + } > + > +child_out: > + return ret; > +} > + > +static int lm3532_probe(struct i2c_client *client, > + const struct i2c_device_id *id) > +{ > + struct lm3532_data *drvdata; > + int ret = 0; > + int count; > + > + count = device_get_child_node_count(&client->dev); > + if (!count) { > + dev_err(&client->dev, "LEDs are not defined in device tree!"); > + return -ENODEV; > + } > + > + drvdata = devm_kzalloc(&client->dev, struct_size(drvdata, leds, count), > + GFP_KERNEL); > + if (drvdata == NULL) > + return -ENOMEM; > + > + drvdata->client = client; > + drvdata->dev = &client->dev; > + > + drvdata->regmap = devm_regmap_init_i2c(client, &lm3532_regmap_config); > + if (IS_ERR(drvdata->regmap)) { > + ret = PTR_ERR(drvdata->regmap); > + dev_err(&client->dev, "Failed to allocate register map: %d\n", > + ret); > + return ret; > + } > + > + mutex_init(&drvdata->lock); > + i2c_set_clientdata(client, drvdata); > + > + ret = lm3532_parse_node(drvdata); > + if (ret) { > + dev_err(&client->dev, "Failed to parse node\n"); > + return ret; > + } > + > + if (drvdata->enable_gpio) > + gpiod_direction_output(drvdata->enable_gpio, 1); > + > + return ret; > +} > + > +static int lm3532_remove(struct i2c_client *client) > +{ > + struct lm3532_data *drvdata = i2c_get_clientdata(client);
mutex_destroy() is missing here.
> + if (drvdata->enable_gpio) > + gpiod_direction_output(drvdata->enable_gpio, 0); > + > + return 0; > +} > + > +static const struct of_device_id of_lm3532_leds_match[] = { > + { .compatible = "ti,lm3532", }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, of_lm3532_leds_match); > + > +static const struct i2c_device_id lm3532_id[] = { > + {LM3532_NAME, 0}, > + {} > +}; > +MODULE_DEVICE_TABLE(i2c, lm3532_id); > + > +static struct i2c_driver lm3532_i2c_driver = { > + .probe = lm3532_probe, > + .remove = lm3532_remove, > + .id_table = lm3532_id, > + .driver = { > + .name = LM3532_NAME, > + .of_match_table = of_lm3532_leds_match, > + }, > +}; > +module_i2c_driver(lm3532_i2c_driver); > + > +MODULE_DESCRIPTION("Back Light driver for LM3532"); > +MODULE_LICENSE("GPL v2"); > +MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>"); > diff --git a/include/dt-bindings/leds/leds-lm3532.h b/include/dt-bindings/leds/leds-lm3532.h > new file mode 100644 > index 000000000000..724dbc0cb395 > --- /dev/null > +++ b/include/dt-bindings/leds/leds-lm3532.h
This should go in a separate patch, with DT bindings - see checkpatch.pl complaint.
> @@ -0,0 +1,72 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* TI LM3532 LED driver > + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ > + */ > + > +#ifndef __DT_BINDINGS_LEDS_LM3532_H > +#define __DT_BINDINGS_LEDS_LM3532_H > + > +#define LM3532_BL_MODE_MANUAL 0x00 /* "man" */ > +#define LM3532_BL_MODE_ALS 0x01 /* "als" */ > + > +/* ALS Resistor Select */ > +#define LM3532_IMP_HIGH 0x00 > +#define LM3532_IMP_37K 0x01 > +#define LM3532_IMP_18_5K 0x02 > +#define LM3532_IMP_12_33K 0x03 > +#define LM3532_IMP_9_25K 0x04 > +#define LM3532_IMP_7_4K 0x05 > +#define LM3532_IMP_6_17K 0x06 > +#define LM3532_IMP_5_29K 0x07 > +#define LM3532_IMP_4_63K 0x08 > +#define LM3532_IMP_4_11K 0x09 > +#define LM3532_IMP_3_7K 0x0a > +#define LM3532_IMP_3_36K 0x0b > +#define LM3532_IMP_3_08K 0x0c > +#define LM3532_IMP_2_85K 0x0d > +#define LM3532_IMP_2_64K 0x0e > +#define LM3532_IMP_2_44K 0x0f > +#define LM3532_IMP_2_31K 0x10 > +#define LM3532_IMP_2_18K 0x11 > +#define LM3532_IMP_2_06K 0x12 > +#define LM3532_IMP_1_95K 0x13 > +#define LM3532_IMP_1_85K 0x14 > +#define LM3532_IMP_1_76K 0x15 > +#define LM3532_IMP_1_68K 0x16 > +#define LM3532_IMP_1_61K 0x17 > +#define LM3532_IMP_1_54K 0x18 > +#define LM3532_IMP_1_48K 0x19 > +#define LM3532_IMP_1_42K 0x1a > +#define LM3532_IMP_1_37K 0x1b > +#define LM3532_IMP_1_32K 0x1c > +#define LM3532_IMP_1_28K 0x1d > +#define LM3532_IMP_1_23K 0x1e > +#define LM3532_IMP_1_19K 0x1f > + > +/* ALS Averaging Time */ > +#define LM3532_ALS_AVRG_TIME_17_92ms 0x00 > +#define LM3532_ALS_AVRG_TIME_35_84ms 0x01 > +#define LM3532_ALS_AVRG_TIME_71_68ms 0x02 > +#define LM3532_ALS_AVRG_TIME_143_36ms 0x03 > +#define LM3532_ALS_AVRG_TIME_286_72ms 0x04 > +#define LM3532_ALS_AVRG_TIME_573_44ms 0x05 > +#define LM3532_ALS_AVRG_TIME_1146_88ms 0x06 > +#define LM3532_ALS_AVRG_TIME_2293_76ms 0x07 > + > +/* ALS input select */ > +#define LM3532_ALS_INPUT_AVRG 0x00 /* ALS1 and ALS2 input average */ > +#define LM3532_ALS_INPUT_ALS1 0x01 /* ALS1 Input */ > +#define LM3532_ALS_INPUT_ALS2 0x02 /* ALS2 Input */ > +#define LM3532_ALS_INPUT_CEIL 0x03 /* Max of ALS1 and ALS2 */ > + > +/* Ramp Times */ > +#define LM3532_RAMP_8us 0x00 > +#define LM3532_RAMP_1024us 0x01 > +#define LM3532_RAMP_2048us 0x02 > +#define LM3532_RAMP_4096us 0x03 > +#define LM3532_RAMP_8192us 0x04 > +#define LM3532_RAMP_16384us 0x05 > +#define LM3532_RAMP_32768us 0x06 > +#define LM3532_RAMP_65536us 0x07 > + > +#endif /* __DT_BINDINGS_LEDS_LM3532_H */ >
-- Best regards, Jacek Anaszewski
| |