lkml.org 
[lkml]   [2019]   [Mar]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/4] ARM: dts: omap4-droid4: Update backlight dt properties
From
Date
Pavel

Thanks for the review.

On 3/8/19 9:14 AM, Pavel Machek wrote:
> Hi!
>
>> Update the properties for the lm3532 device node for droid4.
>> With this change the backlight LED string and the keypad
>> LED strings will be controlled separately.
>>
>> Signed-off-by: Dan Murphy <dmurphy@ti.com>
>> ---
>> arch/arm/boot/dts/omap4-droid4-xt894.dts | 27 +++++++++++++++++-------
>> 1 file changed, 19 insertions(+), 8 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
>> index e21ec929f096..94e3d53dbcf3 100644
>> --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
>> +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
>> @@ -6,6 +6,7 @@
>> /dts-v1/;
>>
>> #include <dt-bindings/input/input.h>
>> +#include <dt-bindings/leds/leds-lm3532.h>
>> #include "omap443x.dtsi"
>> #include "motorola-cpcap-mapphone.dtsi"
>>
>> @@ -383,20 +384,30 @@
>> };
>>
>> &i2c1 {
>> - lm3532@38 {
>> + led-controller@38 {
>> compatible = "ti,lm3532";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> reg = <0x38>;
>>
>> enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
>>
>> - lcd_backlight: backlight {
>> - compatible = "ti,lm3532-backlight";
>> + ramp-up-ms = <LM3532_RAMP_1024us>;
>> + ramp-down-ms = <LM3532_RAMP_65536us>;
>
> I guess dt people will have some comments here. I'd expect
>
> ramp-up-us = <1024> would be more natural.
>

Actually ramp-up-us/ramp-down-us is more correct this is an error in this dt definition
and will be fixed in v2


>> + lcd_backlight: led@0 {
>> + reg = <0>;
>> + led-sources = <2>;
>> + ti,led-mode = <LM3532_BL_MODE_MANUAL>;
>> + label = "backlight";
>
> Ok, so we'll have lm3532::backlight. That is not too useful, as it
> does not tell userland what kaclight it is.
>
> main_display::backlight ?
>
> OTOH this one is not too important as backlight subsystem should
> handle this.
>

For Droid4 I am not particular to any specific label.

And if the series in https://lkml.org/lkml/2018/11/7/144
is ever implemented then the label may change as well.

The driver forces the lm3532 string to be part of the label.

This was a discussion a while back with Jacek when I submitted other drivers.

>> + led@1 {
>> + reg = <1>;
>> + led-sources = <1>;
>> + ti,led-mode = <LM3532_BL_MODE_MANUAL>;
>> + label = "keypad";
>
> I guess best variant would be inputX::backlight here, but that might
> be tricky to implement.
>

Yeah because we don't know what input the keyboard would be on.
Unless there are APIs to retrieve that info. I have not looked at the input
framework in a while.

Dan

> Pavel
>


--
------------------
Dan Murphy

\
 
 \ /
  Last update: 2019-03-08 16:47    [W:0.056 / U:0.852 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site