lkml.org 
[lkml]   [2019]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] auxdisplay: charlcd: make backlight initial state configurable
Date
The charlcd driver currently flashes the backlight once on init.
This may not be desirable. Thus, add options for turning the
backlight off or on as well.

Signed-off-by: Mans Rullgard <mans@mansr.com>
---
drivers/auxdisplay/Kconfig | 21 +++++++++++++++++++++
drivers/auxdisplay/charlcd.c | 10 +++++++++-
2 files changed, 30 insertions(+), 1 deletion(-)

diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig
index 7d3fe27d6868..c52c738e554a 100644
--- a/drivers/auxdisplay/Kconfig
+++ b/drivers/auxdisplay/Kconfig
@@ -445,6 +445,27 @@ config PANEL_BOOT_MESSAGE
An empty message will only clear the display at driver init time. Any other
printf()-formatted message is valid with newline and escape codes.

+choice
+ prompt "Backlight initial state"
+ default CHARLCD_BL_FLASH
+
+ config CHARLCD_BL_OFF
+ bool "Off"
+ help
+ Backlight is initially turned off
+
+ config CHARLCD_BL_ON
+ bool "On"
+ help
+ Backlight is initially turned on
+
+ config CHARLCD_BL_FLASH
+ bool "Flash"
+ help
+ Backlight is flashed briefly on init
+
+endchoice
+
endif # AUXDISPLAY

config PANEL
diff --git a/drivers/auxdisplay/charlcd.c b/drivers/auxdisplay/charlcd.c
index db0356dca2d7..ff8c53c082ff 100644
--- a/drivers/auxdisplay/charlcd.c
+++ b/drivers/auxdisplay/charlcd.c
@@ -769,6 +769,14 @@ static void charlcd_puts(struct charlcd *lcd, const char *s)
#define LCD_INIT_TEXT "Linux-" UTS_RELEASE "\n"
#endif

+#ifdef CONFIG_CHARLCD_BL_ON
+#define LCD_INIT_BL "\x1b[L+"
+#elif defined (CONFIG_CHARLCD_BL_FLASH)
+#define LCD_INIT_BL "\x1b[L*"
+#else
+#define LCD_INIT_BL "\x1b[L-"
+#endif
+
/* initialize the LCD driver */
static int charlcd_init(struct charlcd *lcd)
{
@@ -790,7 +798,7 @@ static int charlcd_init(struct charlcd *lcd)
return ret;

/* display a short message */
- charlcd_puts(lcd, "\x1b[Lc\x1b[Lb\x1b[L*" LCD_INIT_TEXT);
+ charlcd_puts(lcd, "\x1b[Lc\x1b[Lb" LCD_INIT_BL LCD_INIT_TEXT);

/* clear the display on the next device opening */
priv->must_clear = true;
--
2.20.1
\
 
 \ /
  Last update: 2019-03-01 19:49    [W:0.425 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site