lkml.org 
[lkml]   [2019]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH v2 3/3] dt-bindings: arm: atmel: add binding for SAM9X60 shutdown controller
Date
On 21/02/2019 at 14:45, Claudiu Beznea - M18063 wrote:
> From: Claudiu Beznea <claudiu.beznea@microchip.com>
>
> Add documentation for SAM9X60 shutdown controller.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>

Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>

Thanks Claudiu. Regards,
Nicolas

> ---
> Documentation/devicetree/bindings/arm/atmel-sysregs.txt | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> index 14f319f694b7..50f282ccbcb7 100644
> --- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> +++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
> @@ -83,7 +83,7 @@ SHDWC SAMA5D2-Compatible Shutdown Controller
> 1) shdwc node
>
> required properties:
> -- compatible: should be "atmel,sama5d2-shdwc".
> +- compatible: should be "atmel,sama5d2-shdwc" or "microchip,sam9x60-shdwc".
> - reg: should contain registers location and length
> - clocks: phandle to input clock.
> - #address-cells: should be one. The cell is the wake-up input index.
> @@ -95,6 +95,9 @@ optional properties:
> microseconds. It's usually a board-related property.
> - atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
>
> +optional microchip,sam9x60-shdwc properties:
> +- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
> +
> The node contains child nodes for each wake-up input that the platform uses.
>
> 2) input nodes
>


--
Nicolas Ferre
\
 
 \ /
  Last update: 2019-02-21 15:10    [W:0.048 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site