lkml.org 
[lkml]   [2019]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/3] power: reset: at91-poweroff: add support for SAM9X60
Date
From: Claudiu Beznea <claudiu.beznea@microchip.com>

Add support for SAM9X60 shutdown controller.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
---
drivers/power/reset/at91-sama5d2_shdwc.c | 11 +++++++++++
1 file changed, 11 insertions(+)

diff --git a/drivers/power/reset/at91-sama5d2_shdwc.c b/drivers/power/reset/at91-sama5d2_shdwc.c
index 0747e0cdf350..e341cc5c0ea6 100644
--- a/drivers/power/reset/at91-sama5d2_shdwc.c
+++ b/drivers/power/reset/at91-sama5d2_shdwc.c
@@ -246,12 +246,23 @@ static const struct shdwc_config sama5d2_shdwc_config = {
.sr_rtcwk_shift = 5,
.sr_rttwk_shift = SHDW_CFG_NOT_USED,
};
+
+static const struct shdwc_config sam9x60_shdwc_config = {
+ .wkup_pin_input = 0,
+ .mr_rtcwk_shift = 17,
+ .mr_rttwk_shift = 16,
+ .sr_rtcwk_shift = 5,
+ .sr_rttwk_shift = 4,
};

static const struct of_device_id at91_shdwc_of_match[] = {
{
.compatible = "atmel,sama5d2-shdwc",
.data = &sama5d2_shdwc_config,
+ },
+ {
+ .compatible = "microchip,sam9x60-shdwc",
+ .data = &sam9x60_shdwc_config,
}, {
/*sentinel*/
}
--
2.7.4
\
 
 \ /
  Last update: 2019-02-21 14:46    [W:0.059 / U:1.384 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site