lkml.org 
[lkml]   [2019]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V4 1/4] dt-bindings: fsl: scu: add general interrupt support
Date
Add scu general interrupt function support.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Changes since V3:
- make general MU interrupt channel as optional;
- rename "gi3" to "gip3" according to driver/dts change.
---
.../devicetree/bindings/arm/freescale/fsl,scu.txt | 18 ++++++++++++------
1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
index 72d481c..4a9b9ab 100644
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
@@ -22,9 +22,11 @@ Required properties:
-------------------
- compatible: should be "fsl,imx-scu".
- mbox-names: should include "tx0", "tx1", "tx2", "tx3",
- "rx0", "rx1", "rx2", "rx3".
-- mboxes: List of phandle of 4 MU channels for tx and 4 MU channels
- for rx. All 8 MU channels must be in the same MU instance.
+ "rx0", "rx1", "rx2", "rx3";
+ include "gip3" if want to support general MU interrupt.
+- mboxes: List of phandle of 4 MU channels for tx, 4 MU channels for
+ rx, and 1 optional MU channel for general interrupt.
+ All MU channels must be in the same MU instance.
Cross instances are not allowed. The MU instance can only
be one of LSIO MU0~M4 for imx8qxp and imx8qm. Users need
to make sure use the one which is not conflict with other
@@ -34,6 +36,7 @@ Required properties:
Channel 1 must be "tx1" or "rx1".
Channel 2 must be "tx2" or "rx2".
Channel 3 must be "tx3" or "rx3".
+ General interrupt rx channel must be "gip3".
e.g.
mboxes = <&lsio_mu1 0 0
&lsio_mu1 0 1
@@ -42,7 +45,8 @@ Required properties:
&lsio_mu1 1 0
&lsio_mu1 1 1
&lsio_mu1 1 2
- &lsio_mu1 1 3>;
+ &lsio_mu1 1 3
+ &lsio_mu1 3 3>;
See Documentation/devicetree/bindings/mailbox/fsl,mu.txt
for detailed mailbox binding.

@@ -133,7 +137,8 @@ firmware {
scu {
compatible = "fsl,imx-scu";
mbox-names = "tx0", "tx1", "tx2", "tx3",
- "rx0", "rx1", "rx2", "rx3";
+ "rx0", "rx1", "rx2", "rx3",
+ "gip3";
mboxes = <&lsio_mu1 0 0
&lsio_mu1 0 1
&lsio_mu1 0 2
@@ -141,7 +146,8 @@ firmware {
&lsio_mu1 1 0
&lsio_mu1 1 1
&lsio_mu1 1 2
- &lsio_mu1 1 3>;
+ &lsio_mu1 1 3
+ &lsio_mu1 3 3>;

clk: clk {
compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
--
2.7.4
\
 
 \ /
  Last update: 2019-02-21 10:20    [W:0.382 / U:0.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site