lkml.org 
[lkml]   [2019]   [Feb]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] regulator: fan53555: Add support for FAN53526
Date
The FAN53526 differs from the FAN53555 only in that the mode bit in
VSEL0/VSEL1 is moved to the CONTROL register, the voltage selector mask
is extended by 1 bit and the step is different.

So extend the existing fan53555 driver to support FAN53526 as well.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
.../bindings/regulator/fan53555.txt | 3 +-
drivers/regulator/fan53555.c | 101 ++++++++++++++++--
2 files changed, 93 insertions(+), 11 deletions(-)

diff --git a/Documentation/devicetree/bindings/regulator/fan53555.txt b/Documentation/devicetree/bindings/regulator/fan53555.txt
index 54a3f2c80e3a..e7fc045281d1 100644
--- a/Documentation/devicetree/bindings/regulator/fan53555.txt
+++ b/Documentation/devicetree/bindings/regulator/fan53555.txt
@@ -1,7 +1,8 @@
Binding for Fairchild FAN53555 regulators

Required properties:
- - compatible: one of "fcs,fan53555", "silergy,syr827", "silergy,syr828"
+ - compatible: one of "fcs,fan53555", "fcs,fan53526", "silergy,syr827" or
+ "silergy,syr828"
- reg: I2C address

Optional properties:
diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
index a3bc8037153e..d7142352f6bc 100644
--- a/drivers/regulator/fan53555.c
+++ b/drivers/regulator/fan53555.c
@@ -40,7 +40,6 @@
/* VSEL bit definitions */
#define VSEL_BUCK_EN (1 << 7)
#define VSEL_MODE (1 << 6)
-#define VSEL_NSEL_MASK 0x3F
/* Chip ID and Verison */
#define DIE_ID 0x0F /* ID1 */
#define DIE_REV 0x0F /* ID2 */
@@ -49,14 +48,26 @@
#define CTL_SLEW_MASK (0x7 << 4)
#define CTL_SLEW_SHIFT 4
#define CTL_RESET (1 << 2)
+#define CTL_MODE_VSEL0_MODE BIT(0)
+#define CTL_MODE_VSEL1_MODE BIT(1)

#define FAN53555_NVOLTAGES 64 /* Numbers of voltages */
+#define FAN53526_NVOLTAGES 128

enum fan53555_vendor {
- FAN53555_VENDOR_FAIRCHILD = 0,
+ FAN53526_VENDOR_FAIRCHILD = 0,
+ FAN53555_VENDOR_FAIRCHILD,
FAN53555_VENDOR_SILERGY,
};

+enum {
+ FAN53526_CHIP_ID_01 = 1,
+};
+
+enum {
+ FAN53526_CHIP_REV_08 = 8,
+};
+
/* IC Type */
enum {
FAN53555_CHIP_ID_00 = 0,
@@ -94,8 +105,12 @@ struct fan53555_device_info {
/* Voltage range and step(linear) */
unsigned int vsel_min;
unsigned int vsel_step;
+ unsigned int vsel_count;
/* Voltage slew rate limiting */
unsigned int slew_rate;
+ /* Mode */
+ unsigned int mode_reg;
+ unsigned int mode_mask;
/* Sleep voltage cache */
unsigned int sleep_vol_cache;
};
@@ -111,7 +126,7 @@ static int fan53555_set_suspend_voltage(struct regulator_dev *rdev, int uV)
if (ret < 0)
return ret;
ret = regmap_update_bits(di->regmap, di->sleep_reg,
- VSEL_NSEL_MASK, ret);
+ di->desc.vsel_mask, ret);
if (ret < 0)
return ret;
/* Cache the sleep voltage setting.
@@ -143,11 +158,11 @@ static int fan53555_set_mode(struct regulator_dev *rdev, unsigned int mode)

switch (mode) {
case REGULATOR_MODE_FAST:
- regmap_update_bits(di->regmap, di->vol_reg,
- VSEL_MODE, VSEL_MODE);
+ regmap_update_bits(di->regmap, di->mode_reg,
+ di->mode_mask, di->mode_mask);
break;
case REGULATOR_MODE_NORMAL:
- regmap_update_bits(di->regmap, di->vol_reg, VSEL_MODE, 0);
+ regmap_update_bits(di->regmap, di->vol_reg, di->mode_mask, 0);
break;
default:
return -EINVAL;
@@ -161,10 +176,10 @@ static unsigned int fan53555_get_mode(struct regulator_dev *rdev)
unsigned int val;
int ret = 0;

- ret = regmap_read(di->regmap, di->vol_reg, &val);
+ ret = regmap_read(di->regmap, di->mode_reg, &val);
if (ret < 0)
return ret;
- if (val & VSEL_MODE)
+ if (val & di->mode_mask)
return REGULATOR_MODE_FAST;
else
return REGULATOR_MODE_NORMAL;
@@ -219,6 +234,34 @@ static const struct regulator_ops fan53555_regulator_ops = {
.set_suspend_disable = fan53555_set_suspend_disable,
};

+static int fan53526_voltages_setup_fairchild(struct fan53555_device_info *di)
+{
+ /* Init voltage range and step */
+ switch (di->chip_id) {
+ case FAN53526_CHIP_ID_01:
+ switch (di->chip_rev) {
+ case FAN53526_CHIP_REV_08:
+ di->vsel_min = 600000;
+ di->vsel_step = 6250;
+ break;
+ default:
+ dev_err(di->dev,
+ "Chip ID %d with rev %d not supported!\n",
+ di->chip_id, di->chip_rev);
+ return -EINVAL;
+ }
+ break;
+ default:
+ dev_err(di->dev,
+ "Chip ID %d not supported!\n", di->chip_id);
+ return -EINVAL;
+ }
+
+ di->vsel_count = FAN53526_NVOLTAGES;
+
+ return 0;
+}
+
static int fan53555_voltages_setup_fairchild(struct fan53555_device_info *di)
{
/* Init voltage range and step */
@@ -257,6 +300,8 @@ static int fan53555_voltages_setup_fairchild(struct fan53555_device_info *di)
return -EINVAL;
}

+ di->vsel_count = FAN53555_NVOLTAGES;
+
return 0;
}

@@ -274,6 +319,8 @@ static int fan53555_voltages_setup_silergy(struct fan53555_device_info *di)
return -EINVAL;
}

+ di->vsel_count = FAN53555_NVOLTAGES;
+
return 0;
}

@@ -302,7 +349,35 @@ static int fan53555_device_setup(struct fan53555_device_info *di,
return -EINVAL;
}

+ /* Setup mode control register */
+ switch (di->vendor) {
+ case FAN53526_VENDOR_FAIRCHILD:
+ di->mode_reg = FAN53555_CONTROL;
+
+ switch (pdata->sleep_vsel_id) {
+ case FAN53555_VSEL_ID_0:
+ di->mode_mask = CTL_MODE_VSEL1_MODE;
+ break;
+ case FAN53555_VSEL_ID_1:
+ di->mode_mask = CTL_MODE_VSEL0_MODE;
+ break;
+ }
+ break;
+ case FAN53555_VENDOR_FAIRCHILD:
+ case FAN53555_VENDOR_SILERGY:
+ di->mode_reg = di->vol_reg;
+ di->mode_mask = VSEL_MODE;
+ break;
+ default:
+ dev_err(di->dev, "vendor %d not supported!\n", di->vendor);
+ return -EINVAL;
+ }
+
+ /* Setup voltage range */
switch (di->vendor) {
+ case FAN53526_VENDOR_FAIRCHILD:
+ ret = fan53526_voltages_setup_fairchild(di);
+ break;
case FAN53555_VENDOR_FAIRCHILD:
ret = fan53555_voltages_setup_fairchild(di);
break;
@@ -326,13 +401,13 @@ static int fan53555_regulator_register(struct fan53555_device_info *di,
rdesc->supply_name = "vin";
rdesc->ops = &fan53555_regulator_ops;
rdesc->type = REGULATOR_VOLTAGE;
- rdesc->n_voltages = FAN53555_NVOLTAGES;
+ rdesc->n_voltages = di->vsel_count;
rdesc->enable_reg = di->vol_reg;
rdesc->enable_mask = VSEL_BUCK_EN;
rdesc->min_uV = di->vsel_min;
rdesc->uV_step = di->vsel_step;
rdesc->vsel_reg = di->vol_reg;
- rdesc->vsel_mask = VSEL_NSEL_MASK;
+ rdesc->vsel_mask = di->vsel_count - 1;
rdesc->owner = THIS_MODULE;

di->rdev = devm_regulator_register(di->dev, &di->desc, config);
@@ -368,6 +443,9 @@ static struct fan53555_platform_data *fan53555_parse_dt(struct device *dev,

static const struct of_device_id fan53555_dt_ids[] = {
{
+ .compatible = "fcs,fan53526",
+ .data = (void *)FAN53526_VENDOR_FAIRCHILD,
+ }, {
.compatible = "fcs,fan53555",
.data = (void *)FAN53555_VENDOR_FAIRCHILD
}, {
@@ -467,6 +545,9 @@ static int fan53555_regulator_probe(struct i2c_client *client,

static const struct i2c_device_id fan53555_id[] = {
{
+ .name = "fan53526",
+ .driver_data = FAN53526_VENDOR_FAIRCHILD
+ }, {
.name = "fan53555",
.driver_data = FAN53555_VENDOR_FAIRCHILD
}, {
--
2.18.0
\
 
 \ /
  Last update: 2019-02-21 01:43    [W:0.045 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site