lkml.org 
[lkml]   [2019]   [Feb]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v3] usb: chipidea: Grab the (legacy) USB PHY by phandle first
From
Date
Hi,

On Mon, 2019-02-18 at 03:04 +0000, Peter Chen wrote:
> > According to the chipidea driver bindings, the USB PHY is specified via the "phys"
> > phandle node. However, this only takes effect for USB PHYs that use the common
> > PHY framework. For legacy USB PHYs, a simple lookup based on the USB PHY
> > type is done instead.
> >
> > This does not play out well when more than one USB PHY is registered, since the
> > first registered PHY matching the type will always be returned regardless of what
> > the driver was bound to.
> >
> > Fix this by looking up the PHY based on the "phys" phandle node.
> > Although generic PHYs are rather matched by their "phys-name" and not the "phys"
> > phandle directly, there is no helper for similar lookup on legacy PHYs and it's
> > probably not worth the effort to add it.
> >
> > When no legacy USB PHY is found by phandle, fallback to grabbing any registered
> > USB2 PHY. This ensures backward compatibility if some users were actually relying
> > on this mechanism.
> >
> > Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
> > ---
> > Changes since v2:
> > * Fixed typos in commit message.
> >
> > Changes since v1:
> > * Only consider legacy USB PHY error for fallback as suggested;
> > * Checked against EPROBE_DEFER before entering fallback.
> >
> > drivers/usb/chipidea/core.c | 9 ++++++++-
> > 1 file changed, 8 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index
> > 7bfcbb23c2a4..016e4004fe9d 100644
> > --- a/drivers/usb/chipidea/core.c
> > +++ b/drivers/usb/chipidea/core.c
> > @@ -954,8 +954,15 @@ static int ci_hdrc_probe(struct platform_device *pdev)
> > } else if (ci->platdata->usb_phy) {
> > ci->usb_phy = ci->platdata->usb_phy;
> > } else {
> > + ci->usb_phy = devm_usb_get_phy_by_phandle(dev->parent, "phys",
> > + 0);
> > ci->phy = devm_phy_get(dev->parent, "usb-phy");
> > - ci->usb_phy = devm_usb_get_phy(dev->parent,
> > USB_PHY_TYPE_USB2);
> > +
> > + /* Fallback to grabbing any registered USB2 PHY */
> > + if (IS_ERR(ci->usb_phy) &&
> > + PTR_ERR(ci->usb_phy) != -EPROBE_DEFER)
> > + ci->usb_phy = devm_usb_get_phy(dev->parent,
> > + USB_PHY_TYPE_USB2);
> >
>
> I think you may need to do above if ci->phy is error, and not the error is -EPROBE_DEFER.

As Thomas pointed out during the review of v1, the initial flow is to
try and get both ci->usb_phy and ci->phy and let the code use ci->phy
in priority later.

This change attempts to keep this flow intact. The EPROBE_DEFER check
is in case the initial ci->usb_phy is valid but deferred: we don't want
to overwrite it by calling devm_usb_get_phy which might return an
actual error and result in losing the EPROBE_DEFER information.

Does that make sense to you?

Cheers,

Paul

> Peter
>
> > /* if both generic PHY and USB PHY layers aren't enabled */
> > if (PTR_ERR(ci->phy) == -ENOSYS &&
> > --
> > 2.20.1
--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
\
 
 \ /
  Last update: 2019-02-18 09:33    [W:0.103 / U:0.828 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site