lkml.org 
[lkml]   [2019]   [Feb]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v3] usb: chipidea: Grab the (legacy) USB PHY by phandle first
Date

> According to the chipidea driver bindings, the USB PHY is specified via the "phys"
> phandle node. However, this only takes effect for USB PHYs that use the common
> PHY framework. For legacy USB PHYs, a simple lookup based on the USB PHY
> type is done instead.
>
> This does not play out well when more than one USB PHY is registered, since the
> first registered PHY matching the type will always be returned regardless of what
> the driver was bound to.
>
> Fix this by looking up the PHY based on the "phys" phandle node.
> Although generic PHYs are rather matched by their "phys-name" and not the "phys"
> phandle directly, there is no helper for similar lookup on legacy PHYs and it's
> probably not worth the effort to add it.
>
> When no legacy USB PHY is found by phandle, fallback to grabbing any registered
> USB2 PHY. This ensures backward compatibility if some users were actually relying
> on this mechanism.
>
> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
> ---
> Changes since v2:
> * Fixed typos in commit message.
>
> Changes since v1:
> * Only consider legacy USB PHY error for fallback as suggested;
> * Checked against EPROBE_DEFER before entering fallback.
>
> drivers/usb/chipidea/core.c | 9 ++++++++-
> 1 file changed, 8 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index
> 7bfcbb23c2a4..016e4004fe9d 100644
> --- a/drivers/usb/chipidea/core.c
> +++ b/drivers/usb/chipidea/core.c
> @@ -954,8 +954,15 @@ static int ci_hdrc_probe(struct platform_device *pdev)
> } else if (ci->platdata->usb_phy) {
> ci->usb_phy = ci->platdata->usb_phy;
> } else {
> + ci->usb_phy = devm_usb_get_phy_by_phandle(dev->parent, "phys",
> + 0);
> ci->phy = devm_phy_get(dev->parent, "usb-phy");
> - ci->usb_phy = devm_usb_get_phy(dev->parent,
> USB_PHY_TYPE_USB2);
> +
> + /* Fallback to grabbing any registered USB2 PHY */
> + if (IS_ERR(ci->usb_phy) &&
> + PTR_ERR(ci->usb_phy) != -EPROBE_DEFER)
> + ci->usb_phy = devm_usb_get_phy(dev->parent,
> + USB_PHY_TYPE_USB2);
>

I think you may need to do above if ci->phy is error, and not the error is -EPROBE_DEFER.

Peter

> /* if both generic PHY and USB PHY layers aren't enabled */
> if (PTR_ERR(ci->phy) == -ENOSYS &&
> --
> 2.20.1

\
 
 \ /
  Last update: 2019-02-18 04:04    [W:0.091 / U:0.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site