lkml.org 
[lkml]   [2019]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v3 1/6] dt-bindings: add binding for USBSS-DRD controller.
On Thu, Jan 31, 2019 at 11:52:28AM +0000, Pawel Laszczak wrote:
> This patch aim at documenting USB related dt-bindings for the
> Cadence USBSS-DRD controller.
>
> Signed-off-by: Pawel Laszczak <pawell@cadence.com>
> ---
> .../devicetree/bindings/usb/cdns-usb3.txt | 33 +++++++++++++++++++
> 1 file changed, 33 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/usb/cdns-usb3.txt
>
> diff --git a/Documentation/devicetree/bindings/usb/cdns-usb3.txt b/Documentation/devicetree/bindings/usb/cdns-usb3.txt
> new file mode 100644
> index 000000000000..6dc38be77f5c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/cdns-usb3.txt
> @@ -0,0 +1,33 @@
> +Binding for the Cadence USBSS-DRD controller
> +
> +Required properties:
> + - reg: Physical base address and size of the controller's register areas.
> + Controller has 3 different regions:
> + region 1 - HOST registers area
> + region 2 - DEVICE registers area
> + region 3 - OTG/DRD registers area
> + - reg-names - register memory area names:
> + "xhci" - for HOST registers space
> + "dev" - for DEVICE registers space
> + "otg" - for OTG/DRD registers space
> + - compatible: Should contain: "cdns,usb3-1.0.0" or "cdns,usb3-1.0.1"
> + - interrupts: Interrupt specifier. Refer to interrupt bindings.
> + Driver supports only single interrupt line.
Driver supports or h/w only has 1 interrupt?

> + This single interrupt is shared between Device,
> + host and OTG/DRD part of driver.
> +
> +Optional properties:
> + - maximum-speed : valid arguments are "super-speed", "high-speed" and
> + "full-speed"; refer to usb/generic.txt
> + - dr_mode: Should be one of "host", "peripheral" or "otg".
> + - phys: reference to the USB PHY
> +
> +Example:
> + usb@f3000000 {
> + compatible = "cdns,usb3";

Doesn't match above.

> + interrupts = <USB_IRQ 7 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0xf3000000 0x10000 /* memory area for HOST registers */
> + 0xf3010000 0x10000 /* memory area for DEVICE registers */
> + 0xf3020000 0x10000>; /* memory area for OTG/DRD registers */

Are these really 64KB long? That wastes virtual address space on 32-bit
systems if not.

> + reg-names = "xhci", "dev", "otg";
> + };
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2019-02-13 23:51    [W:0.266 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site