lkml.org 
[lkml]   [2019]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] tty: serial: amba-pl011: remove set but unused variable
Date
Fix the following warning:
drivers/tty/serial/amba-pl011.c: In function check_apply_cts_event_workaround:
drivers/tty/serial/amba-pl011.c:1461:15: warning: variable dummy_read set but not used [-Wunused-but-set-variable]

The data read is useless and can be dropped.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
---
drivers/tty/serial/amba-pl011.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 4b28134..c5e9475 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1452,8 +1452,6 @@ static void pl011_modem_status(struct uart_amba_port *uap)

static void check_apply_cts_event_workaround(struct uart_amba_port *uap)
{
- unsigned int dummy_read;
-
if (!uap->vendor->cts_event_workaround)
return;

@@ -1465,8 +1463,8 @@ static void check_apply_cts_event_workaround(struct uart_amba_port *uap)
* single apb access will incur 2 pclk(133.12Mhz) delay,
* so add 2 dummy reads
*/
- dummy_read = pl011_read(uap, REG_ICR);
- dummy_read = pl011_read(uap, REG_ICR);
+ pl011_read(uap, REG_ICR);
+ pl011_read(uap, REG_ICR);
}

static irqreturn_t pl011_int(int irq, void *dev_id)
--
1.7.12.4
\
 
 \ /
  Last update: 2019-12-06 09:10    [W:0.019 / U:1.704 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site