lkml.org 
[lkml]   [2019]   [Dec]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v2 0/3] net: macb: fix for fixed link, support for c45 mdio and 10G
Date
Corrected typo in email id of Nicolas Ferre.

>-----Original Message-----
>From: Milind Parab <mparab@cadence.com>
>Sent: Friday, December 13, 2019 3:10 PM
>To: nicolas.nerre@microchip.com; andrew@lunn.ch;
>antoine.tenart@bootlin.com; f.fainelli@gmail.com; rmk+kernel@armlinux.org.uk
>Cc: davem@davemloft.net; netdev@vger.kernel.org; hkallweit1@gmail.com;
>linux-kernel@vger.kernel.org; Dhananjay Vilasrao Kangude
><dkangude@cadence.com>; a.fatoum@pengutronix.de; brad.mouring@ni.com;
>Parshuram Raju Thombare <pthombar@cadence.com>; Milind Parab
><mparab@cadence.com>
>Subject: [PATCH v2 0/3] net: macb: fix for fixed link, support for c45 mdio and
>10G
>
>This patch series applies to Cadence Ethernet MAC Controller.
>The first patch in this series is related to the patch that converts the
>driver to phylink interface in net-next "net: macb: convert to phylink".
>Next patch is for adding support for C45 interface and the final patch
>adds 10G MAC support.
>
>The patch sequences are detailed as below
>
>1. 0001-net-macb-fix-for-fixed-link-mode
>This patch fix the issue with fixed-link mode in macb phylink interface.
>In fixed-link we don't need to parse phandle because it's better handled
>by phylink_of_phy_connect()
>
>2. 0002-net-macb-add-support-for-C45-MDIO-read-write
>This patch is to support C45 interface to PHY. This upgrade is downward
>compatible.
>All versions of the MAC (old and new) using the GPL driver support both Clause 22
>and
>Clause 45 operation. Whether the access is in Clause 22 or Clause 45 format
>depends
>on the data pattern written to the PHY management register.
>
>3. 0003-net-macb-add-support-for-high-speed-interface
>This patch add support for 10G fixed mode.
>
>Changes since v1:
>1. phy_node reference count handling in patch 0001-net-macb-fix-for-fixed-link-
>mode
>2. Using fixed value for HS_MAC_SPEED_x
>
>Thanks,
>Milind Parab
>
>
>Milind Parab (3):
> net: macb: fix for fixed-link mode
> net: macb: add support for C45 MDIO read/write
> net: macb: add support for high speed interface
>
> drivers/net/ethernet/cadence/macb.h | 65 ++++++-
> drivers/net/ethernet/cadence/macb_main.c | 224 +++++++++++++++++++----
> 2 files changed, 247 insertions(+), 42 deletions(-)
>
>--
>2.17.1

\
 
 \ /
  Last update: 2019-12-15 10:50    [W:0.089 / U:0.912 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site