lkml.org 
[lkml]   [2019]   [Dec]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 09/14] ARM: dts: sun8i: r40: Add I2C pinmux options
Date
From: Chen-Yu Tsai <wens@csie.org>

The R40 has five I2C controllers. Currently only I2C0 has its pinmux
option defined.

Add the options for the remaining four, and set them as the default,
since each controller has only one possible pinmux configuration.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sun8i-r40.dtsi | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index 421dfbbfd7ee..82ea0b5b0710 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -373,6 +373,26 @@ i2c0_pins: i2c0-pins {
function = "i2c0";
};

+ i2c1_pins: i2c1-pins {
+ pins = "PB18", "PB19";
+ function = "i2c1";
+ };
+
+ i2c2_pins: i2c2-pins {
+ pins = "PB20", "PB21";
+ function = "i2c2";
+ };
+
+ i2c3_pins: i2c3-pins {
+ pins = "PI0", "PI1";
+ function = "i2c3";
+ };
+
+ i2c4_pins: i2c4-pins {
+ pins = "PI2", "PI3";
+ function = "i2c4";
+ };
+
mmc0_pins: mmc0-pins {
pins = "PF0", "PF1", "PF2",
"PF3", "PF4", "PF5";
@@ -528,6 +548,8 @@ i2c1: i2c@1c2b000 {
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C1>;
resets = <&ccu RST_BUS_I2C1>;
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -539,6 +561,8 @@ i2c2: i2c@1c2b400 {
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C2>;
resets = <&ccu RST_BUS_I2C2>;
+ pinctrl-0 = <&i2c2_pins>;
+ pinctrl-names = "default";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -550,6 +574,8 @@ i2c3: i2c@1c2b800 {
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C3>;
resets = <&ccu RST_BUS_I2C3>;
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -561,6 +587,8 @@ i2c4: i2c@1c2c000 {
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C4>;
resets = <&ccu RST_BUS_I2C4>;
+ pinctrl-0 = <&i2c4_pins>;
+ pinctrl-names = "default";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
--
2.24.0
\
 
 \ /
  Last update: 2019-12-15 18:01    [W:0.279 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site