Messages in this thread | | | From | Woody Suwalski <> | Subject | Regression in 5.4 kernel on 32-bit Radeon IBM T40 | Date | Sat, 14 Dec 2019 22:17:15 -0500 |
| |
Regression in 5.4 kernel on 32-bit Radeon IBM T40 triggered by commit 33b3ad3788aba846fc8b9a065fe2685a0b64f713 Author: Christoph Hellwig <hch@lst.de> Date: Thu Aug 15 09:27:00 2019 +0200
Howdy, The above patch has triggered a display problem on IBM Thinkpad T40, where the screen is covered with a lots of random short black horizontal lines, or distorted letters in X terms.
The culprit seems to be that the dma_get_required_mask() is returning a value 0x3fffffff which is smaller than dma_get_mask()0xffffffff.That results in dma_addressing_limited()==0 in ttm_bo_device(), and using 40-bits dma instead of 32-bits.
If I hardcode "1" as the last parameter to ttm_bo_device_init() in place of a call to dma_addressing_limited(),the problem goes away.
I have added the debug lines starting with "wms:" to the start of radeon_ttm_init() and of radeon_device_init()printing the interesting variables. /.... [ 2.091692] Linux agpgart interface v0.103 [ 2.092380] agpgart-intel 0000:00:00.0: Intel 855PM Chipset [ 2.107706] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 2.108111] [drm] radeon kernel modesetting enabled. [ 2.108200] radeon 0000:01:00.0: vgaarb: deactivate vga console [ 2.109365] Console: switching to colour dummy device 80x25 ******* radeon_device_init() [ 2.110712] wms: radeon_init flags = 0x90003 [ 2.110718] [drm] initializing kernel modesetting (RV200 0x1002:0x4C57 0x1014:0x0530 0x00). [ 2.111220] agpgart-intel 0000:00:00.0: AGP 2.0 bridge [ 2.111233] agpgart-intel 0000:00:00.0: putting AGP V2 device into 1x mode [ 2.111265] radeon 0000:01:00.0: putting AGP V2 device into 1x mode [ 2.111286] radeon 0000:01:00.0: GTT: 256M 0xD0000000 - 0xDFFFFFFF [ 2.111295] radeon 0000:01:00.0: VRAM: 128M 0x00000000E0000000 - 0x00000000E7FFFFFF (32M used) [ 2.111701] [drm] Detected VRAM RAM=128M, BAR=128M [ 2.111704] [drm] RAM width 64bits DDR ******* radeon_ttm_init() [ 2.111706] wms: dma_addressing_limited=0x0 [ 2.111709] wms: dma_get_mask=0xffffffff, bus_dma_limit=0x0, dma_get_required_mask=0x3fffffff [ 2.115971] [TTM] Zone kernel: Available graphics memory: 437028 KiB [ 2.115973] [TTM] Zone highmem: Available graphics memory: 510440 KiB
What should be the proper value of these dma variables on the 32-bit system? How to fix that issue correctly (patches welcomed :-) )Or is the platform fubar?
Thanks, Woody
| |