Messages in this thread Patch in this message | | | From | Andrey Smirnov <> | Subject | [PATCH v2] ARM: dts: vf610-zii-dev-rev-b: Drop redundant I2C properties | Date | Wed, 11 Dec 2019 05:49:57 -0800 |
| |
ZII VF610 Board Rev. B is supposed to have exactly the same I2C config as Rev. C, including I2C bus recovery settings. Drop redundant I2C properties that are already specified in vf610-zii-dev.dtsi
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Chris Healy <cphealy@gmail.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org ---
Changes since [v1]:
- Reworded commit message to clarify that I2C recovery setttins are supposed to apply to both Dev boards
[v1] lore.kernel.org/lkml/20190820031952.14804-1-andrew.smirnov@gmail.com
arch/arm/boot/dts/vf610-zii-dev-rev-b.dts | 10 ---------- 1 file changed, 10 deletions(-)
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts index 48086c5e8549..e500911ce0a5 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts @@ -323,11 +323,6 @@ }; &i2c0 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c0>; - status = "okay"; - gpio5: io-expander@20 { compatible = "nxp,pca9554"; reg = <0x20>; @@ -350,11 +345,6 @@ }; &i2c2 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - status = "okay"; - tca9548@70 { compatible = "nxp,pca9548"; pinctrl-0 = <&pinctrl_i2c_mux_reset>; -- 2.21.0
| |