lkml.org 
[lkml]   [2019]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] mfd: rk808: Always use poweroff when requested
From
Date


On 11.12.19 03:00, Anand Moon wrote:
> hi Soeren,
>
> On Tue, 10 Dec 2019 at 22:10, Soeren Moch <smoch@web.de> wrote:
>>
>>
>> On 10.12.19 13:55, Markus Reichl wrote:
>>> Hi Anand,
>>>
>>> Am 10.12.19 um 13:42 schrieb Anand Moon:
>>>> Hi Soeren,
>>>>
>>>> On Mon, 9 Dec 2019 at 17:28, Soeren Moch <smoch@web.de> wrote:
>>>>> With the device tree property "rockchip,system-power-controller" we
>>>>> explicitly request to use this PMIC to power off the system. So always
>>>>> register our poweroff function, even if some other handler (probably
>>>>> PSCI poweroff) was registered before.
>>>>>
>>>>> Signed-off-by: Soeren Moch <smoch@web.de>
>>>>> ---
>>>>> Cc: Lee Jones <lee.jones@linaro.org>
>>>>> Cc: Heiko Stuebner <heiko@sntech.de>
>>>>> Cc: linux-arm-kernel@lists.infradead.org
>>>>> Cc: linux-rockchip@lists.infradead.org
>>>>> Cc: linux-kernel@vger.kernel.org
>>>>> ---
>>>>> drivers/mfd/rk808.c | 11 ++---------
>>>>> 1 file changed, 2 insertions(+), 9 deletions(-)
>>>>>
>>>>> diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
>>>>> index a69a6742ecdc..616e44e7ef98 100644
>>>>> --- a/drivers/mfd/rk808.c
>>>>> +++ b/drivers/mfd/rk808.c
>>>>> @@ -550,7 +550,7 @@ static int rk808_probe(struct i2c_client *client,
>>>>> const struct mfd_cell *cells;
>>>>> int nr_pre_init_regs;
>>>>> int nr_cells;
>>>>> - int pm_off = 0, msb, lsb;
>>>>> + int msb, lsb;
>>>>> unsigned char pmic_id_msb, pmic_id_lsb;
>>>>> int ret;
>>>>> int i;
>>>>> @@ -674,16 +674,9 @@ static int rk808_probe(struct i2c_client *client,
>>>>> goto err_irq;
>>>>> }
>>>>>
>>>>> - pm_off = of_property_read_bool(np,
>>>>> - "rockchip,system-power-controller");
>>>>> - if (pm_off && !pm_power_off) {
>>>>> + if (of_property_read_bool(np,
>>>>> "rockchip,system-power-controller")) {
>>>>> rk808_i2c_client = client;
>>>>> pm_power_off = rk808->pm_pwroff_fn;
>>>>> - }
>>>>> -
>>>>> - if (pm_off && !pm_power_off_prepare) {
>>>>> - if (!rk808_i2c_client)
>>>>> - rk808_i2c_client = client;
>>>>> pm_power_off_prepare = rk808->pm_pwroff_prep_fn;
>>>>> }
>>>>>
>>>> I gave this a try on my Rock960 and Odroid N1
>>>> both got kernel panic below.
>>> I see the same on rk3399-roc-pc.
>> This is no panic, it's a harmless warning.
> Ok but my device do not come up cleanly after that, it get stuck in
> u-boot in next boot.
I do not know Rock960 and Odroid N1, so unfortunately I cannot debug
your u-boot problem on these boards. From what you wrote the poweroff
apparently works with this patch, I have no idea what could be a
problem. After a complete power-off I would expect a clean cold boot.
And that 's what I see on my RockPro64 board.

This patch is about doing a PMIC poweroff when this method is requested
in the devicetree. If this method does not work for your boards, you
probably should remove the "rockchip,system-power-controller" property
and use PSCI poweroff or whatever is desired on your boards. This patch
does not change _how_ PMIC poweroff is done, only _that_ this method is
used when explicitly requested.
>
>> The i2c core nowadays expects a specially marked i2c transfer function
>> late in the powerdown cycle:
> You can look into similar commit.
> d785334a0d5deff30a487c74324b842d2179553d (mfd: s2mps11: Add manual
> shutdown method for Odroid XU3)
I cannot see what should be similar in this patch. This patch is about a
totally different PMIC and how this needs to be programmed to work
properly on another different board.

Soeren
>
>> diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
>> index 1a33007b03e9..cec115e0afa4 100644
>> --- a/drivers/i2c/busses/i2c-rk3x.c
>> +++ b/drivers/i2c/busses/i2c-rk3x.c
>> @@ -1126,6 +1126,7 @@ static u32 rk3x_i2c_func(struct i2c_adapter *adap)
>>
>> static const struct i2c_algorithm rk3x_i2c_algorithm = {
>> .master_xfer = rk3x_i2c_xfer,
>> + .master_xfer_atomic = rk3x_i2c_xfer, /* usable for PMIC poweroff */
>> .functionality = rk3x_i2c_func,
>> };
>>
>> ---
>> It is only used for powerdown. The regular i2c xfer function works.
>>
>> Heiko, should I send a formal patch for that?
>>
>> Soeren
>>
>>>> [ 58.305868] xhci-hcd xhci-hcd.0.auto: USB bus 5 deregistered
>>>> [ 58.306747] reboot: Power down
>>>> [ 58.307106] ------------[ cut here ]------------
>>>> [ 58.307510] No atomic I2C transfer handler for 'i2c-0'
>>>> [ 58.308007] WARNING: CPU: 0 PID: 1 at drivers/i2c/i2c-core.h:41
>>>> i2c_transfer+0xe4/0xf8
>>>> [ 58.308696] Modules linked in: snd_soc_hdmi_codec dw_hdmi_i2s_audio
>>>> rockchipdrm analogix_dp brcmfmac nvme dw_mipi_dsi nvme_core dw_hdmi
>>>> panfrost cec brcmutil drm_kms_helper gpu_sched cfg80211 hci_uart drm
>>>> btbcm crct10dif_ce snd_soc_simple_card bluetooth snd_soc_rockchip_i2s
>>>> snd_soc_simple_card_utils snd_soc_rockchip_pcm phy_rockchip_pcie
>>>> ecdh_generic rtc_rk808 ecc pcie_rockchip_host rfkill rockchip_thermal
>>>> ip_tables x_tables ipv6 nf_defrag_ipv6
>>>> [ 58.312150] CPU: 0 PID: 1 Comm: shutdown Not tainted
>>>> 5.5.0-rc1-dirty #1
>>>> [ 58.312725] Hardware name: 96boards Rock960 (DT)
>>>> [ 58.313131] pstate: 60000085 (nZCv daIf -PAN -UAO)
>>>> [ 58.313551] pc : i2c_transfer+0xe4/0xf8
>>>> [ 58.313889] lr : i2c_transfer+0xe4/0xf8
>>>> [ 58.314225] sp : ffff80001004bb00
>>>> [ 58.314516] x29: ffff80001004bb00 x28: ffff00007d208000
>>>> [ 58.314981] x27: 0000000000000000 x26: 0000000000000000
>>>> [ 58.315446] x25: 0000000000000000 x24: 0000000000000008
>>>> [ 58.315910] x23: 0000000000000000 x22: ffff80001004bc74
>>>> [ 58.316375] x21: 0000000000000002 x20: ffff80001004bb58
>>>> [ 58.316841] x19: ffff0000784f0880 x18: 0000000000000010
>>>> [ 58.317305] x17: 0000000000000001 x16: 0000000000000019
>>>> [ 58.317770] x15: ffffffffffffffff x14: ffff8000118398c8
>>>> [ 58.318236] x13: ffff80009004b867 x12: ffff80001004b86f
>>>> [ 58.318701] x11: ffff800011851000 x10: ffff80001004b7f0
>>>> [ 58.319166] x9 : 00000000ffffffd0 x8 : ffff800010699ad8
>>>> [ 58.319631] x7 : 0000000000000265 x6 : ffff800011a20be9
>>>> [ 58.320096] x5 : 0000000000000000 x4 : 0000000000000000
>>>> [ 58.320561] x3 : 00000000ffffffff x2 : ffff800011851ab8
>>>> [ 58.321026] x1 : d375c0d4f4751f00 x0 : 0000000000000000
>>>> [ 58.321491] Call trace:
>>>> [ 58.321710] i2c_transfer+0xe4/0xf8
>>>> [ 58.322020] regmap_i2c_read+0x5c/0x98
>>>> [ 58.322350] _regmap_raw_read+0xcc/0x138
>>>> [ 58.322694] _regmap_bus_read+0x3c/0x70
>>>> [ 58.323034] _regmap_read+0x60/0xe0
>>>> [ 58.323341] _regmap_update_bits+0xc8/0x108
>>>> [ 58.323707] regmap_update_bits_base+0x60/0x90
>>>> [ 58.324099] rk808_device_shutdown+0x38/0x50
>>>> [ 58.324476] machine_power_off+0x24/0x30
>>>> [ 58.324823] kernel_power_off+0x64/0x70
>>>> [ 58.325159] __do_sys_reboot+0x15c/0x240
>>>> [ 58.325504] __arm64_sys_reboot+0x20/0x28
>>>> [ 58.325858] el0_svc_common.constprop.2+0x88/0x150
>>>> [ 58.326279] el0_svc_handler+0x20/0x80
>>>> [ 58.326607] el0_sync_handler+0x118/0x188
>>>> [ 58.326960] el0_sync+0x140/0x180
>>>> [ 58.327251] ---[ end trace b1de39d03d724d01 ]---
>>>>
>>>> -Anand
>>>>
>>>> _______________________________________________
>>>> Linux-rockchip mailing list
>>>> Linux-rockchip@lists.infradead.org
>>>> http://lists.infradead.org/mailman/listinfo/linux-rockchip
>>>>
>>> Gruß,
> -Anand


\
 
 \ /
  Last update: 2019-12-11 11:56    [W:0.079 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site