lkml.org 
[lkml]   [2019]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] mfd: rk808: Always use poweroff when requested
From
Date
On 2019-12-11 10:55 am, Soeren Moch wrote:
>
>
> On 11.12.19 03:00, Anand Moon wrote:
>> hi Soeren,
>>
>> On Tue, 10 Dec 2019 at 22:10, Soeren Moch <smoch@web.de> wrote:
>>>
>>>
>>> On 10.12.19 13:55, Markus Reichl wrote:
>>>> Hi Anand,
>>>>
>>>> Am 10.12.19 um 13:42 schrieb Anand Moon:
>>>>> Hi Soeren,
>>>>>
>>>>> On Mon, 9 Dec 2019 at 17:28, Soeren Moch <smoch@web.de> wrote:
>>>>>> With the device tree property "rockchip,system-power-controller" we
>>>>>> explicitly request to use this PMIC to power off the system. So always
>>>>>> register our poweroff function, even if some other handler (probably
>>>>>> PSCI poweroff) was registered before.
>>>>>>
>>>>>> Signed-off-by: Soeren Moch <smoch@web.de>
>>>>>> ---
>>>>>> Cc: Lee Jones <lee.jones@linaro.org>
>>>>>> Cc: Heiko Stuebner <heiko@sntech.de>
>>>>>> Cc: linux-arm-kernel@lists.infradead.org
>>>>>> Cc: linux-rockchip@lists.infradead.org
>>>>>> Cc: linux-kernel@vger.kernel.org
>>>>>> ---
>>>>>> drivers/mfd/rk808.c | 11 ++---------
>>>>>> 1 file changed, 2 insertions(+), 9 deletions(-)
>>>>>>
>>>>>> diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
>>>>>> index a69a6742ecdc..616e44e7ef98 100644
>>>>>> --- a/drivers/mfd/rk808.c
>>>>>> +++ b/drivers/mfd/rk808.c
>>>>>> @@ -550,7 +550,7 @@ static int rk808_probe(struct i2c_client *client,
>>>>>> const struct mfd_cell *cells;
>>>>>> int nr_pre_init_regs;
>>>>>> int nr_cells;
>>>>>> - int pm_off = 0, msb, lsb;
>>>>>> + int msb, lsb;
>>>>>> unsigned char pmic_id_msb, pmic_id_lsb;
>>>>>> int ret;
>>>>>> int i;
>>>>>> @@ -674,16 +674,9 @@ static int rk808_probe(struct i2c_client *client,
>>>>>> goto err_irq;
>>>>>> }
>>>>>>
>>>>>> - pm_off = of_property_read_bool(np,
>>>>>> - "rockchip,system-power-controller");
>>>>>> - if (pm_off && !pm_power_off) {
>>>>>> + if (of_property_read_bool(np,
>>>>>> "rockchip,system-power-controller")) {
>>>>>> rk808_i2c_client = client;
>>>>>> pm_power_off = rk808->pm_pwroff_fn;
>>>>>> - }
>>>>>> -
>>>>>> - if (pm_off && !pm_power_off_prepare) {
>>>>>> - if (!rk808_i2c_client)
>>>>>> - rk808_i2c_client = client;
>>>>>> pm_power_off_prepare = rk808->pm_pwroff_prep_fn;
>>>>>> }
>>>>>>
>>>>> I gave this a try on my Rock960 and Odroid N1
>>>>> both got kernel panic below.
>>>> I see the same on rk3399-roc-pc.
>>> This is no panic, it's a harmless warning.
>> Ok but my device do not come up cleanly after that, it get stuck in
>> u-boot in next boot.
> I do not know Rock960 and Odroid N1, so unfortunately I cannot debug
> your u-boot problem on these boards. From what you wrote the poweroff
> apparently works with this patch, I have no idea what could be a
> problem. After a complete power-off I would expect a clean cold boot.
> And that 's what I see on my RockPro64 board.

FWIW I've now had a chance to give this a spin on my NanoPC-T4, and
indeed I power-cycled the board about a dozen times in a row without any
problems. So I'm not sure what's up with Anand's boards either :/

Robin.

> This patch is about doing a PMIC poweroff when this method is requested
> in the devicetree. If this method does not work for your boards, you
> probably should remove the "rockchip,system-power-controller" property
> and use PSCI poweroff or whatever is desired on your boards. This patch
> does not change _how_ PMIC poweroff is done, only _that_ this method is
> used when explicitly requested.
>>
>>> The i2c core nowadays expects a specially marked i2c transfer function
>>> late in the powerdown cycle:
>> You can look into similar commit.
>> d785334a0d5deff30a487c74324b842d2179553d (mfd: s2mps11: Add manual
>> shutdown method for Odroid XU3)
> I cannot see what should be similar in this patch. This patch is about a
> totally different PMIC and how this needs to be programmed to work
> properly on another different board.
>
> Soeren
>>
>>> diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
>>> index 1a33007b03e9..cec115e0afa4 100644
>>> --- a/drivers/i2c/busses/i2c-rk3x.c
>>> +++ b/drivers/i2c/busses/i2c-rk3x.c
>>> @@ -1126,6 +1126,7 @@ static u32 rk3x_i2c_func(struct i2c_adapter *adap)
>>>
>>> static const struct i2c_algorithm rk3x_i2c_algorithm = {
>>> .master_xfer = rk3x_i2c_xfer,
>>> + .master_xfer_atomic = rk3x_i2c_xfer, /* usable for PMIC poweroff */
>>> .functionality = rk3x_i2c_func,
>>> };
>>>
>>> ---
>>> It is only used for powerdown. The regular i2c xfer function works.
>>>
>>> Heiko, should I send a formal patch for that?
>>>
>>> Soeren
>>>
>>>>> [ 58.305868] xhci-hcd xhci-hcd.0.auto: USB bus 5 deregistered
>>>>> [ 58.306747] reboot: Power down
>>>>> [ 58.307106] ------------[ cut here ]------------
>>>>> [ 58.307510] No atomic I2C transfer handler for 'i2c-0'
>>>>> [ 58.308007] WARNING: CPU: 0 PID: 1 at drivers/i2c/i2c-core.h:41
>>>>> i2c_transfer+0xe4/0xf8
>>>>> [ 58.308696] Modules linked in: snd_soc_hdmi_codec dw_hdmi_i2s_audio
>>>>> rockchipdrm analogix_dp brcmfmac nvme dw_mipi_dsi nvme_core dw_hdmi
>>>>> panfrost cec brcmutil drm_kms_helper gpu_sched cfg80211 hci_uart drm
>>>>> btbcm crct10dif_ce snd_soc_simple_card bluetooth snd_soc_rockchip_i2s
>>>>> snd_soc_simple_card_utils snd_soc_rockchip_pcm phy_rockchip_pcie
>>>>> ecdh_generic rtc_rk808 ecc pcie_rockchip_host rfkill rockchip_thermal
>>>>> ip_tables x_tables ipv6 nf_defrag_ipv6
>>>>> [ 58.312150] CPU: 0 PID: 1 Comm: shutdown Not tainted
>>>>> 5.5.0-rc1-dirty #1
>>>>> [ 58.312725] Hardware name: 96boards Rock960 (DT)
>>>>> [ 58.313131] pstate: 60000085 (nZCv daIf -PAN -UAO)
>>>>> [ 58.313551] pc : i2c_transfer+0xe4/0xf8
>>>>> [ 58.313889] lr : i2c_transfer+0xe4/0xf8
>>>>> [ 58.314225] sp : ffff80001004bb00
>>>>> [ 58.314516] x29: ffff80001004bb00 x28: ffff00007d208000
>>>>> [ 58.314981] x27: 0000000000000000 x26: 0000000000000000
>>>>> [ 58.315446] x25: 0000000000000000 x24: 0000000000000008
>>>>> [ 58.315910] x23: 0000000000000000 x22: ffff80001004bc74
>>>>> [ 58.316375] x21: 0000000000000002 x20: ffff80001004bb58
>>>>> [ 58.316841] x19: ffff0000784f0880 x18: 0000000000000010
>>>>> [ 58.317305] x17: 0000000000000001 x16: 0000000000000019
>>>>> [ 58.317770] x15: ffffffffffffffff x14: ffff8000118398c8
>>>>> [ 58.318236] x13: ffff80009004b867 x12: ffff80001004b86f
>>>>> [ 58.318701] x11: ffff800011851000 x10: ffff80001004b7f0
>>>>> [ 58.319166] x9 : 00000000ffffffd0 x8 : ffff800010699ad8
>>>>> [ 58.319631] x7 : 0000000000000265 x6 : ffff800011a20be9
>>>>> [ 58.320096] x5 : 0000000000000000 x4 : 0000000000000000
>>>>> [ 58.320561] x3 : 00000000ffffffff x2 : ffff800011851ab8
>>>>> [ 58.321026] x1 : d375c0d4f4751f00 x0 : 0000000000000000
>>>>> [ 58.321491] Call trace:
>>>>> [ 58.321710] i2c_transfer+0xe4/0xf8
>>>>> [ 58.322020] regmap_i2c_read+0x5c/0x98
>>>>> [ 58.322350] _regmap_raw_read+0xcc/0x138
>>>>> [ 58.322694] _regmap_bus_read+0x3c/0x70
>>>>> [ 58.323034] _regmap_read+0x60/0xe0
>>>>> [ 58.323341] _regmap_update_bits+0xc8/0x108
>>>>> [ 58.323707] regmap_update_bits_base+0x60/0x90
>>>>> [ 58.324099] rk808_device_shutdown+0x38/0x50
>>>>> [ 58.324476] machine_power_off+0x24/0x30
>>>>> [ 58.324823] kernel_power_off+0x64/0x70
>>>>> [ 58.325159] __do_sys_reboot+0x15c/0x240
>>>>> [ 58.325504] __arm64_sys_reboot+0x20/0x28
>>>>> [ 58.325858] el0_svc_common.constprop.2+0x88/0x150
>>>>> [ 58.326279] el0_svc_handler+0x20/0x80
>>>>> [ 58.326607] el0_sync_handler+0x118/0x188
>>>>> [ 58.326960] el0_sync+0x140/0x180
>>>>> [ 58.327251] ---[ end trace b1de39d03d724d01 ]---
>>>>>
>>>>> -Anand
>>>>>
>>>>> _______________________________________________
>>>>> Linux-rockchip mailing list
>>>>> Linux-rockchip@lists.infradead.org
>>>>> http://lists.infradead.org/mailman/listinfo/linux-rockchip
>>>>>
>>>> Gruß,
>> -Anand
>
>
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
>

\
 
 \ /
  Last update: 2019-12-12 01:28    [W:0.052 / U:0.460 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site