lkml.org 
[lkml]   [2019]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 6/9] input: elants: read touchscreen size for EKTF3624
From
Date
11.12.2019 19:03, Michał Mirosław пишет:
> EKTF3624 as present in Asus TF300T tablet has touchscreen size encoded
> in different registers.
>
> Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
> ---
> drivers/input/touchscreen/elants_i2c.c | 82 ++++++++++++++++++++++++--
> 1 file changed, 77 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c
> index 369004678a46..1c3eb49a22e4 100644
> --- a/drivers/input/touchscreen/elants_i2c.c
> +++ b/drivers/input/touchscreen/elants_i2c.c
> @@ -34,7 +34,7 @@
> #include <linux/input/mt.h>
> #include <linux/input/touchscreen.h>
> #include <linux/acpi.h>
> -#include <linux/of.h>
> +#include <linux/of_device.h>
> #include <linux/gpio/consumer.h>
> #include <linux/regulator/consumer.h>
> #include <asm/unaligned.h>
> @@ -42,6 +42,10 @@
> /* Device, Driver information */
> #define DEVICE_NAME "elants_i2c"
>
> +/* Device IDs */
> +#define EKTH3500 0
> +#define EKTF3624 1
> +
> /* Convert from rows or columns into resolution */
> #define ELAN_TS_RESOLUTION(n, m) (((n) - 1) * (m))
>
> @@ -162,6 +166,7 @@ struct elants_data {
>
> bool wake_irq_enabled;
> bool keep_power_in_suspend;
> + u8 chip_id;
>
> /* Must be last to be used for DMA operations */
> u8 buf[MAX_PACKET_SIZE] ____cacheline_aligned;
> @@ -436,7 +441,58 @@ static int elants_i2c_query_bc_version(struct elants_data *ts)
> return 0;
> }
>
> -static int elants_i2c_query_ts_info(struct elants_data *ts)
> +static int elants_i2c_query_ts_info_ektf(struct elants_data *ts)
> +{
> + struct i2c_client *client = ts->client;
> + int error;
> + u8 resp[4];
> + u16 phy_x, phy_y;
> + const u8 get_xres_cmd[] = {
> + CMD_HEADER_READ, E_INFO_X_RES, 0x00, 0x00
> + };
> + const u8 get_yres_cmd[] = {
> + CMD_HEADER_READ, E_INFO_Y_RES, 0x00, 0x00
> + };
> +
> + /* Get X/Y size in mm */
> + error = elants_i2c_execute_command(client, get_xres_cmd,
> + sizeof(get_xres_cmd),
> + resp, sizeof(resp), 1,
> + "get X size");
> + if (error)
> + return error;
> +
> + phy_x = resp[2] | ((resp[3] & 0xF0) << 4);
> +
> + error = elants_i2c_execute_command(client, get_yres_cmd,
> + sizeof(get_yres_cmd),
> + resp, sizeof(resp), 1,
> + "get Y size");
> + if (error)
> + return error;
> +
> + phy_y = resp[2] | ((resp[3] & 0xF0) << 4);
> +
> + if (!phy_x || !phy_y) {
> + dev_warn(&client->dev,
> + "invalid size data: %d x %d mm\n",
> + phy_x, phy_y);
> + return 0;
> + }
> +
> + dev_dbg(&client->dev, "phy_x=%d, phy_y=%d\n", phy_x, phy_y);
> +
> + /* calculate resolution from size */
> + ts->x_max = 2240-1;
> + ts->x_res = DIV_ROUND_CLOSEST(ts->prop.max_x, phy_x);
> +
> + ts->y_max = 1408-1;
> + ts->y_res = DIV_ROUND_CLOSEST(ts->prop.max_y, phy_y);
> +
> + return 0;
> +}
> +
> +static int elants_i2c_query_ts_info_ekth(struct elants_data *ts)
> {
> struct i2c_client *client = ts->client;
> int error;
> @@ -587,8 +643,20 @@ static int elants_i2c_initialize(struct elants_data *ts)
> error = elants_i2c_query_test_version(ts);
> if (!error)
> error = elants_i2c_query_bc_version(ts);
> - if (!error)
> - error = elants_i2c_query_ts_info(ts);
> +
> + switch (ts->chip_id) {
> + case EKTH3500:
> + if (!error)
> + error = elants_i2c_query_ts_info_ekth(ts);
> + break;
> + case EKTF3624:
> + if (!error)
> + error = elants_i2c_query_ts_info_ektf(ts);
> + break;
> + default:
> + unreachable();
> + break;
> + }
>
> if (error)
> ts->iap_mode = ELAN_IAP_RECOVERY;
> @@ -1185,6 +1253,9 @@ static int elants_i2c_probe(struct i2c_client *client,
> ts->client = client;
> i2c_set_clientdata(client, ts);
>
> + if (client->dev.of_node)
> + ts->chip_id = (uintptr_t)of_device_get_match_data(&client->dev);
> +
> ts->vcc33 = devm_regulator_get(&client->dev, "vcc33");
> if (IS_ERR(ts->vcc33)) {
> error = PTR_ERR(ts->vcc33);
> @@ -1409,7 +1480,8 @@ MODULE_DEVICE_TABLE(acpi, elants_acpi_id);
>
> #ifdef CONFIG_OF
> static const struct of_device_id elants_of_match[] = {
> - { .compatible = "elan,ekth3500" },
> + { .compatible = "elan,ekth3500", .data = (void *)EKTH3500 },
> + { .compatible = "elan,ektf3624", .data = (void *)EKTF3624 },
> { /* sentinel */ }
> };
> MODULE_DEVICE_TABLE(of, elants_of_match);
>

In a comment to v1 I suggested to remove the OF table and use I2C table
for the OF matching, but this variant is okay as well.

Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>

\
 
 \ /
  Last update: 2019-12-12 01:41    [W:0.191 / U:0.980 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site