lkml.org 
[lkml]   [2019]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH v2 1/9] input: elants: document some registers and values
Add information found in downstream kernels, to make the code less
magic.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
---
drivers/input/touchscreen/elants_i2c.c | 29 +++++++++++++++++++++-----
1 file changed, 24 insertions(+), 5 deletions(-)

diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c
index d4ad24ea54c8..887888c53996 100644
--- a/drivers/input/touchscreen/elants_i2c.c
+++ b/drivers/input/touchscreen/elants_i2c.c
@@ -77,7 +77,11 @@

#define HEADER_REPORT_10_FINGER 0x62

-/* Header (4 bytes) plus 3 fill 10-finger packets */
+/* Power state */
+#define PWR_STATE_DEEP_SLEEP 0
+#define PWR_STATE_NORMAL 1
+
+/* Header (4 bytes) plus 3 full 10-finger packets */
#define MAX_PACKET_SIZE 169

#define BOOT_TIME_DELAY_MS 50
@@ -87,10 +91,21 @@
#define E_ELAN_INFO_BC_VER 0x10
#define E_ELAN_INFO_TEST_VER 0xE0
#define E_ELAN_INFO_FW_ID 0xF0
+#define E_POWER_MODE 0x40
+#define E_POWER_STATE 0x50
+#define E_INFO_X_RES 0x60
+#define E_INFO_Y_RES 0x63
#define E_INFO_OSR 0xD6
#define E_INFO_PHY_SCAN 0xD7
#define E_INFO_PHY_DRIVER 0xD8

+/* FW write command, 0x54 0x?? 0x0, 0x01 */
+#define E_POWER_MODE_BATTERY 0x40
+#define E_POWER_MODE_AC 0x41
+#define E_POWER_MODE_USB 0x42
+#define E_POWER_STATE_SLEEP 0x50
+#define E_POWER_STATE_RESUME 0x58
+
#define MAX_RETRIES 3
#define MAX_FW_UPDATE_RETRIES 30

@@ -231,8 +246,8 @@ static int elants_i2c_calibrate(struct elants_data *ts)
{
struct i2c_client *client = ts->client;
int ret, error;
- static const u8 w_flashkey[] = { 0x54, 0xC0, 0xE1, 0x5A };
- static const u8 rek[] = { 0x54, 0x29, 0x00, 0x01 };
+ static const u8 w_flashkey[] = { CMD_HEADER_WRITE, 0xC0, 0xE1, 0x5A };
+ static const u8 rek[] = { CMD_HEADER_WRITE, 0x29, 0x00, 0x01 };
static const u8 rek_resp[] = { CMD_HEADER_REK, 0x66, 0x66, 0x66 };

disable_irq(client->irq);
@@ -1295,7 +1310,9 @@ static int __maybe_unused elants_i2c_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct elants_data *ts = i2c_get_clientdata(client);
- const u8 set_sleep_cmd[] = { 0x54, 0x50, 0x00, 0x01 };
+ const u8 set_sleep_cmd[] = {
+ CMD_HEADER_WRITE, E_POWER_STATE_SLEEP, 0x00, 0x01
+ };
int retry_cnt;
int error;

@@ -1332,7 +1349,9 @@ static int __maybe_unused elants_i2c_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct elants_data *ts = i2c_get_clientdata(client);
- const u8 set_active_cmd[] = { 0x54, 0x58, 0x00, 0x01 };
+ const u8 set_active_cmd[] = {
+ CMD_HEADER_WRITE, E_POWER_STATE_RESUME, 0x00, 0x01
+ };
int retry_cnt;
int error;

--
2.20.1
\
 
 \ /
  Last update: 2019-12-11 17:03    [W:0.195 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site