lkml.org 
[lkml]   [2019]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 09/79] regulator: pfuze100-regulator: Variable "val" in pfuze100_regulator_probe() could be uninitialized
Date
From: Yizhuo <yzhai003@ucr.edu>

[ Upstream commit 1252b283141f03c3dffd139292c862cae10e174d ]

In function pfuze100_regulator_probe(), variable "val" could be
initialized if regmap_read() fails. However, "val" is used to
decide the control flow later in the if statement, which is
potentially unsafe.

Signed-off-by: Yizhuo <yzhai003@ucr.edu>
Link: https://lore.kernel.org/r/20190929170957.14775-1-yzhai003@ucr.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/regulator/pfuze100-regulator.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
index 31c3a236120a8..69a377ab26041 100644
--- a/drivers/regulator/pfuze100-regulator.c
+++ b/drivers/regulator/pfuze100-regulator.c
@@ -710,7 +710,13 @@ static int pfuze100_regulator_probe(struct i2c_client *client,

/* SW2~SW4 high bit check and modify the voltage value table */
if (i >= sw_check_start && i <= sw_check_end) {
- regmap_read(pfuze_chip->regmap, desc->vsel_reg, &val);
+ ret = regmap_read(pfuze_chip->regmap,
+ desc->vsel_reg, &val);
+ if (ret) {
+ dev_err(&client->dev, "Fails to read from the register.\n");
+ return ret;
+ }
+
if (val & sw_hi) {
if (pfuze_chip->chip_id == PFUZE3000 ||
pfuze_chip->chip_id == PFUZE3001) {
--
2.20.1


\
 
 \ /
  Last update: 2019-11-08 20:03    [W:0.300 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site