lkml.org 
[lkml]   [2019]   [Nov]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 02/79] regulator: of: fix suspend-min/max-voltage parsing
Date
From: Marco Felsch <m.felsch@pengutronix.de>

[ Upstream commit 131cb1210d4b58acb0695707dad2eb90dcb50a2a ]

Currently the regulator-suspend-min/max-microvolt must be within the
root regulator node but the dt-bindings specifies it as subnode
properties for the regulator-state-[mem/disk/standby] node. The only DT
using this bindings currently is the at91-sama5d2_xplained.dts and this
DT uses it correctly. I don't know if it isn't tested but it can't work
without this fix.

Fixes: f7efad10b5c4 ("regulator: add PM suspend and resume hooks")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Link: https://lore.kernel.org/r/20190917154021.14693-3-m.felsch@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/regulator/of_regulator.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c
index 210fc20f7de7a..b255590aef36e 100644
--- a/drivers/regulator/of_regulator.c
+++ b/drivers/regulator/of_regulator.c
@@ -214,12 +214,12 @@ static void of_get_regulation_constraints(struct device_node *np,
"regulator-off-in-suspend"))
suspend_state->enabled = DISABLE_IN_SUSPEND;

- if (!of_property_read_u32(np, "regulator-suspend-min-microvolt",
- &pval))
+ if (!of_property_read_u32(suspend_np,
+ "regulator-suspend-min-microvolt", &pval))
suspend_state->min_uV = pval;

- if (!of_property_read_u32(np, "regulator-suspend-max-microvolt",
- &pval))
+ if (!of_property_read_u32(suspend_np,
+ "regulator-suspend-max-microvolt", &pval))
suspend_state->max_uV = pval;

if (!of_property_read_u32(suspend_np,
--
2.20.1


\
 
 \ /
  Last update: 2019-11-08 20:02    [W:0.222 / U:1.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site