lkml.org 
[lkml]   [2019]   [Oct]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/2] pinctrl: Add new pinctrl/GPIO driver
Date
Hi,

This series is to add pinctrl & GPIO controller driver for a new SoC.
Patch 1 adds pinmux & GPIO controller driver.
Patch 2 adds the corresponding dt bindings YAML document.

Patches are against Linux 5.4-rc1 at below Git tree:
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git

v2:
- Enable GENERIC_PINMUX_FUNCTIONS & GENERIC_PINCTRL_GROUPS and use core
provided code for pinmux_ops & pinctrl_ops. Remove related code from
the driver.
- Enable GENERIC_PINCONF & use core provided pinconf code. Remove related
code from the driver.
- Use GPIOLIB_IRQCHIP framework core code instead of implementing separtely
in the driver.
- Enable GPIO_GENERIC and switch to core provided memory mapped GPIO banks
design.
- Use standard pinctrl DT properties instead of custom made properties.
- Address code quality related review concerns.

v1:
- Initial version.

Rahul Tanwar (2):
pinctrl: Add pinmux & GPIO controller driver for a new SoC
dt-bindings: pinctrl: intel: Add for new SoC

.../bindings/pinctrl/intel,lgm-pinctrl.yaml | 114 +++
drivers/pinctrl/Kconfig | 18 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-equilibrium.c | 957 +++++++++++++++++++++
drivers/pinctrl/pinctrl-equilibrium.h | 150 ++++
5 files changed, 1240 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/intel,lgm-pinctrl.yaml
create mode 100644 drivers/pinctrl/pinctrl-equilibrium.c
create mode 100644 drivers/pinctrl/pinctrl-equilibrium.h

--
2.11.0

\
 
 \ /
  Last update: 2019-10-30 05:24    [W:0.056 / U:0.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site