lkml.org 
[lkml]   [2019]   [Oct]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v4 0/9] Prereqs for HiKey960 USB support
Date
Just another round here trying to push forward a patch series
submitted previously by Yu Chen to get HiKey960 dev-board's USB
functionality working.

This series focuses on just the dwc3 changes and bindings
needed.

The current full patchset can be found here:
https://git.linaro.org/people/john.stultz/android-dev.git/log/?id=ce013895404bd4a5b6487df0ac30ed2dbea43f5d

NOTE: I unfortunately don't have any deep knowledge of the
hardware other then the previously submitted code and what I
can intuit from testing, but I tried to document the previously
undocumented bindings as best I could, fixed up a few minor
checkpatch issues and tried to address previous feedback as best
I could.

I'd greatly appreciate any feedback or thoughts!

thanks
-john

New in v4:
* Just added a few Reviewed-by: lines from Rob Herring


Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
CC: ShuFan Lee <shufan_lee@richtek.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: Yu Chen <chenyu56@huawei.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Jun Li <lijun.kernel@gmail.com>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Jack Pham <jackp@codeaurora.org>
Cc: linux-usb@vger.kernel.org
Cc: devicetree@vger.kernel.org

John Stultz (6):
dt-bindings: usb: rt1711h: Add connector bindings
dt-bindings: usb: dwc3: Allow clock list & resets to be more flexible
usb: dwc3: Rework clock initialization to be more flexible
usb: dwc3: Rework resets initialization to be more flexible
dt-bindings: usb: generic: Add role-switch-default-host binding
usb: dwc3: Add host-mode as default support

Yu Chen (3):
usb: dwc3: Execute GCTL Core Soft Reset while switch modes
usb: dwc3: Increase timeout for CmdAct cleared by device controller
usb: dwc3: Registering a role switch in the DRD code.

.../devicetree/bindings/usb/dwc3.txt | 5 +-
.../devicetree/bindings/usb/generic.txt | 5 ++
.../bindings/usb/richtek,rt1711h.txt | 29 +++++++
drivers/usb/dwc3/Kconfig | 1 +
drivers/usb/dwc3/core.c | 38 +++++----
drivers/usb/dwc3/core.h | 6 ++
drivers/usb/dwc3/drd.c | 78 ++++++++++++++++++-
drivers/usb/dwc3/gadget.c | 2 +-
8 files changed, 144 insertions(+), 20 deletions(-)

--
2.17.1

\
 
 \ /
  Last update: 2019-10-28 23:00    [W:0.176 / U:1.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site