Messages in this thread | | | From | Tao Ren <> | Subject | Re: [PATCH net-next v9 0/3] net: phy: support 1000Base-X auto-negotiation for BCM54616S | Date | Thu, 17 Oct 2019 16:41:29 +0000 |
| |
Hi David,
I'm not sure if the patch series v9 was delivered to your mailbox successfully, but somehow I still cannot find the patches in patchwork.
Any suggestions? Maybe my git is mis-configured?
Thanks,
Tao
On 10/15/19 12:12 PM, Tao Ren wrote: > This patch series aims at supporting auto negotiation when BCM54616S is > running in 1000Base-X mode: without the patch series, BCM54616S PHY driver > would report incorrect link speed in 1000Base-X mode. > > Patch #1 (of 3) modifies assignment to OR when dealing with dev_flags in > phy_attach_direct function, so that dev_flags updated in BCM54616S PHY's > probe callback won't be lost. > > Patch #2 (of 3) adds several genphy_c37_* functions to support clause 37 > 1000Base-X auto-negotiation, and these functions are called in BCM54616S > PHY driver. > > Patch #3 (of 3) detects BCM54616S PHY's operation mode and calls according > genphy_c37_* functions to configure auto-negotiation and parse link > attributes (speed, duplex, and etc.) in 1000Base-X mode. > > Heiner Kallweit (1): > net: phy: add support for clause 37 auto-negotiation > > Tao Ren (2): > net: phy: modify assignment to OR for dev_flags in phy_attach_direct > net: phy: broadcom: add 1000Base-X support for BCM54616S > > drivers/net/phy/broadcom.c | 57 +++++++++++++- > drivers/net/phy/phy_device.c | 141 ++++++++++++++++++++++++++++++++++- > include/linux/brcmphy.h | 10 ++- > include/linux/phy.h | 4 + > 4 files changed, 205 insertions(+), 7 deletions(-) >
| |