lkml.org 
[lkml]   [2019]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v9 5/5] MIPS: SGI-IP27: Enable ethernet phy on second Origin 200 module
From
Date
On 10/10/2019 05:59 PM, Thomas Bogendoerfer wrote:

> PROM only enables ethernet PHY on first Origin 200 module, so we must
> do it ourselves for the second module.
>
> Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
> ---
> arch/mips/pci/pci-ip27.c | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
> index 441eb9383b20..7cc784cb299b 100644
> --- a/arch/mips/pci/pci-ip27.c
> +++ b/arch/mips/pci/pci-ip27.c
> @@ -7,6 +7,11 @@
> * Copyright (C) 1999, 2000, 04 Ralf Baechle (ralf@linux-mips.org)
> * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
> */
> +#include <asm/sn/addrs.h>
> +#include <asm/sn/types.h>
> +#include <asm/sn/klconfig.h>
> +#include <asm/sn/hub.h>
> +#include <asm/sn/ioc3.h>
> #include <asm/pci/bridge.h>
>
> dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
> @@ -31,3 +36,20 @@ int pcibus_to_node(struct pci_bus *bus)
> }
> EXPORT_SYMBOL(pcibus_to_node);
> #endif /* CONFIG_NUMA */
> +
> +static void ip29_fixup_phy(struct pci_dev *dev)
> +{
> + int nasid = pcibus_to_node(dev->bus);
> + u32 sid;
> +
> + if (nasid != 1)
> + return; /* only needed on second module */
> +
> + /* enable ethernet PHY on IP29 systemboard */
> + pci_read_config_dword(dev, PCI_SUBSYSTEM_VENDOR_ID, &sid);
> + if (sid == ((PCI_VENDOR_ID_SGI << 16) | IOC3_SUBSYS_IP29_SYSBOARD))

I thought PCI was little endian, thuis vendor ID at offset 0 and device ID
at offset 2?

[...]

MBR, Sergei

\
 
 \ /
  Last update: 2019-10-10 18:39    [W:0.081 / U:0.672 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site