lkml.org 
[lkml]   [2019]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH net] net: phy: Fix "link partner" information disappear issue
Date
Some drivers just call phy_ethtool_ksettings_set() to set the
links, for those phy drivers that use genphy_read_status(), if
autoneg is on, and the link is up, than execute "ethtool -s
ethx autoneg on" will cause "link partner" information disappear.

The call trace is phy_ethtool_ksettings_set()->phy_start_aneg()
->linkmode_zero(phydev->lp_advertising)->genphy_read_status(),
the link didn't change, so genphy_read_status() just return, and
phydev->lp_advertising is zero now.

This patch call genphy_read_lpa() before the link state judgement
to fix this problem.

Fixes: 88d6272acaaa ("net: phy: avoid unneeded MDIO reads in genphy_read_status")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
---
drivers/net/phy/phy_device.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 9d2bbb1..ef3073c 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1839,6 +1839,10 @@ int genphy_read_status(struct phy_device *phydev)
if (err)
return err;

+ err = genphy_read_lpa(phydev);
+ if (err < 0)
+ return err;
+
/* why bother the PHY if nothing can have changed */
if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link)
return 0;
@@ -1848,10 +1852,6 @@ int genphy_read_status(struct phy_device *phydev)
phydev->pause = 0;
phydev->asym_pause = 0;

- err = genphy_read_lpa(phydev);
- if (err < 0)
- return err;
-
if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) {
phy_resolve_aneg_linkmode(phydev);
} else if (phydev->autoneg == AUTONEG_DISABLE) {
--
2.8.1
\
 
 \ /
  Last update: 2019-10-10 11:34    [W:0.104 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site