lkml.org 
[lkml]   [2019]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 4/5] phy: tegra: xusb: Add support for power supplies
From
Date
Hi Thierry,

I think any non-zero return value of
regulator_bulk_enable()/devm_regulator_bulk_get() means error.

Thanks,

JC

On 1/25/19 7:25 PM, Thierry Reding wrote:
> From: Thierry Reding <treding@nvidia.com>
>
> Support enabling various supplies needed to provide power to the PLLs
> and logic used to drive the USB, PCI and SATA pads.
>
> Signed-off-by: Thierry Reding <treding@nvidia.com>
> ---
> drivers/phy/tegra/xusb.c | 34 +++++++++++++++++++++++++++++++++-
> drivers/phy/tegra/xusb.h | 5 +++++
> 2 files changed, 38 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c
> index 57a2d08ef6da..e510629f4f1c 100644
> --- a/drivers/phy/tegra/xusb.c
> +++ b/drivers/phy/tegra/xusb.c
> @@ -864,6 +864,7 @@ static int tegra_xusb_padctl_probe(struct platform_device *pdev)
> struct tegra_xusb_padctl *padctl;
> const struct of_device_id *match;
> struct resource *res;
> + unsigned int i;
> int err;
>
> /* for backwards compatibility with old device trees */
> @@ -901,14 +902,38 @@ static int tegra_xusb_padctl_probe(struct platform_device *pdev)
> goto remove;
> }
>
> + padctl->supplies = devm_kcalloc(&pdev->dev, padctl->soc->num_supplies,
> + sizeof(*padctl->supplies), GFP_KERNEL);
> + if (!padctl->supplies) {
> + err = -ENOMEM;
> + goto remove;
> + }
> +
> + for (i = 0; i < padctl->soc->num_supplies; i++)
> + padctl->supplies[i].supply = padctl->soc->supply_names[i];
> +
> + err = devm_regulator_bulk_get(&pdev->dev, padctl->soc->num_supplies,
> + padctl->supplies);
> + if (err < 0) {
> + dev_err(&pdev->dev, "failed to get regulators: %d\n", err);
> + goto remove;
> + }
> +
> err = reset_control_deassert(padctl->rst);
> if (err < 0)
> goto remove;
>
> + err = regulator_bulk_enable(padctl->soc->num_supplies,
> + padctl->supplies);
> + if (err < 0) {
> + dev_err(&pdev->dev, "failed to enable supplies: %d\n", err);
> + goto reset;
> + }
> +
> err = tegra_xusb_setup_pads(padctl);
> if (err < 0) {
> dev_err(&pdev->dev, "failed to setup pads: %d\n", err);
> - goto reset;
> + goto power_down;
> }
>
> err = tegra_xusb_setup_ports(padctl);
> @@ -921,6 +946,8 @@ static int tegra_xusb_padctl_probe(struct platform_device *pdev)
>
> remove_pads:
> tegra_xusb_remove_pads(padctl);
> +power_down:
> + regulator_bulk_disable(padctl->soc->num_supplies, padctl->supplies);
> reset:
> reset_control_assert(padctl->rst);
> remove:
> @@ -936,6 +963,11 @@ static int tegra_xusb_padctl_remove(struct platform_device *pdev)
> tegra_xusb_remove_ports(padctl);
> tegra_xusb_remove_pads(padctl);
>
> + err = regulator_bulk_disable(padctl->soc->num_supplies,
> + padctl->supplies);
> + if (err < 0)
> + dev_err(&pdev->dev, "failed to disable supplies: %d\n", err);
> +
> err = reset_control_assert(padctl->rst);
> if (err < 0)
> dev_err(&pdev->dev, "failed to assert reset: %d\n", err);
> diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h
> index bb60fc09c752..5d5d22f6cb41 100644
> --- a/drivers/phy/tegra/xusb.h
> +++ b/drivers/phy/tegra/xusb.h
> @@ -370,6 +370,9 @@ struct tegra_xusb_padctl_soc {
> } ports;
>
> const struct tegra_xusb_padctl_ops *ops;
> +
> + const char * const *supply_names;
> + unsigned int num_supplies;
> };
>
> struct tegra_xusb_padctl {
> @@ -393,6 +396,8 @@ struct tegra_xusb_padctl {
> unsigned int enable;
>
> struct clk *clk;
> +
> + struct regulator_bulk_data *supplies;
> };
>
> static inline void padctl_writel(struct tegra_xusb_padctl *padctl, u32 value,

\
 
 \ /
  Last update: 2019-01-28 08:22    [W:0.085 / U:0.484 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site