Messages in this thread | | | Subject | Re: [PATCH 1/5] dt-bindings: phy: tegra: Add Tegra186 support | From | jckuo <> | Date | Mon, 28 Jan 2019 15:04:36 +0800 |
| |
Reviewed-by: JC Kuo <jckuo@nvidia.com>
On 1/25/19 7:25 PM, Thierry Reding wrote: > From: Thierry Reding <treding@nvidia.com> > > Extend the bindings to cover the set of features found in Tegra186. Note > that, technically, there are four more supplies connected to the XUSB > pad controller (DVDD_PEX, DVDD_PEX_PLL, HVDD_PEX and HVDD_PEX_PLL), but > the power sequencing requirements of Tegra186 require these to be under > the control of the PMIC. > > Signed-off-by: Thierry Reding <treding@nvidia.com> > --- > .../bindings/phy/nvidia,tegra124-xusb-padctl.txt | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt > index 3742c152c467..daedb15f322e 100644 > --- a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt > +++ b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt > @@ -36,11 +36,20 @@ Required properties: > - Tegra124: "nvidia,tegra124-xusb-padctl" > - Tegra132: "nvidia,tegra132-xusb-padctl", "nvidia,tegra124-xusb-padctl" > - Tegra210: "nvidia,tegra210-xusb-padctl" > + - Tegra186: "nvidia,tegra186-xusb-padctl" > - reg: Physical base address and length of the controller's registers. > - resets: Must contain an entry for each entry in reset-names. > - reset-names: Must include the following entries: > - "padctl" > > +For Tegra186: > +- avdd-pll-erefeut-supply: UPHY brick and reference clock as well as UTMI PHY > + power supply. Must supply 1.8 V. > +- avdd-usb-supply: USB I/Os, VBUS, ID, REXT, D+/D- power supply. Must supply > + 3.3 V. > +- vclamp-usb-supply: Bias rail for USB pad. Must supply 1.8 V. > +- vddio-hsic-supply: HSIC PHY power supply. Must supply 1.2 V. > + > > Pad nodes: > ==========
| |