lkml.org 
[lkml]   [2019]   [Jan]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/2] dt-bindings: iio: chemical: Add bindings for bme680
On Fri, 11 Jan 2019 15:53:59 -0500
Sebastien Bourdelin <sebastien.bourdelin@gmail.com> wrote:

> BME680 is a pressure/temperature/humidity/voc sensor.
>
> Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@gmail.com>

Hmm. We could add the VDD and VDIO regulators perhaps.
Driver assumes they are on currently but we'll get a board where control
is needed sooner or later. I'm not that fussed about this though.

Jonathan

> ---
> .../devicetree/bindings/iio/chemical/bme680.txt | 11 +++++++++++
> 1 file changed, 11 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/chemical/bme680.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/chemical/bme680.txt b/Documentation/devicetree/bindings/iio/chemical/bme680.txt
> new file mode 100644
> index 000000000000..885a1b918340
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/chemical/bme680.txt
> @@ -0,0 +1,11 @@
> +Bosch Sensortec BME680 pressure/temperature/humidity/voc sensors
> +
> +Required properties:
> +- compatible: must be "bosch,bme680"
> +
> +Example:
> +
> +bme680@77 {
> + compatible = "bosch,bme680";
> + reg = <0x77>;
> +};

\
 
 \ /
  Last update: 2019-01-12 19:29    [W:0.155 / U:2.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site