lkml.org 
[lkml]   [2019]   [Jan]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/2] iio: chemical: bme680: Add device-tree support
On Sat, 12 Jan 2019 15:12:26 +0530
Himanshu Jha <himanshujha199640@gmail.com> wrote:

> On Fri, Jan 11, 2019 at 03:53:58PM -0500, Sebastien Bourdelin wrote:
> > This commit allow the driver to work with device-tree.
> >
> > Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@gmail.com>
> > ---
>
> I get the following compilation failure:
>
> Below I have `allyesconfig` except 'BME680' configure as [M]
> in case you wish to reproduce.
>
> himanshu@himanshu-Vostro-3559:~/linux-next$ grep -i -w 'CONFIG_BME680\|CONFIG_ACPI\|CONFIG_OF' .config
> CONFIG_ACPI=y
> CONFIG_OF=y
> CONFIG_BME680=m
> himanshu@himanshu-Vostro-3559:~/linux-next$ sudo make drivers/iio/chemical/bme680_spi.o
> make[1]: Nothing to be done for 'all'.
> CALL scripts/checksyscalls.sh
> DESCEND objtool
> CC [M] drivers/iio/chemical/bme680_spi.o
> In file included from ./include/linux/acpi.h:41:0,
> from drivers/iio/chemical/bme680_spi.c:7:
> ./include/linux/module.h:213:1: error: expected ‘,’ or ‘;’ before ‘extern’
> extern typeof(name) __mod_##type##__##name##_device_table \
> ^
> drivers/iio/chemical/bme680_spi.c:119:1: note: in expansion of macro ‘MODULE_DEVICE_TABLE’
> MODULE_DEVICE_TABLE(of, bme680_of_spi_match);
> ^~~~~~~~~~~~~~~~~~~

huh? That one had me confused. Google however got me there quickly.
Missing semi colon on the line above MODULE_DEVICE_TABLE.

J

> scripts/Makefile.build:291: recipe for target 'drivers/iio/chemical/bme680_spi.o' failed
> make[1]: *** [drivers/iio/chemical/bme680_spi.o] Error 1
> Makefile:1741: recipe for target 'drivers/iio/chemical/bme680_spi.o' failed
> make: *** [drivers/iio/chemical/bme680_spi.o] Error 2
>
> BUT if:
>
> himanshu@himanshu-Vostro-3559:~/linux-next$ make allyesconfig
> scripts/kconfig/conf --allyesconfig Kconfig
> #
> # configuration written to .config
> #
>
> himanshu@himanshu-Vostro-3559:~/linux-next$ sudo make drivers/iio/chemical/bme680_spi.o
> scripts/kconfig/conf --syncconfig Kconfig
> make[1]: Nothing to be done for 'all'.
> HOSTCC scripts/dtc/dtc.o
> HOSTCC scripts/dtc/flattree.o
> HOSTCC scripts/dtc/fstree.o
> HOSTCC scripts/dtc/data.o
> HOSTCC scripts/dtc/livetree.o
> HOSTCC scripts/dtc/treesource.o
> HOSTCC scripts/dtc/srcpos.o
> HOSTCC scripts/dtc/checks.o
> HOSTCC scripts/dtc/util.o
> LEX scripts/dtc/dtc-lexer.lex.c
> YACC scripts/dtc/dtc-parser.tab.h
> HOSTCC scripts/dtc/dtc-lexer.lex.o
> YACC scripts/dtc/dtc-parser.tab.c
> HOSTCC scripts/dtc/dtc-parser.tab.o
> HOSTLD scripts/dtc/dtc
> CC scripts/mod/empty.o
> MKELF scripts/mod/elfconfig.h
> HOSTCC scripts/mod/modpost.o
> CC scripts/mod/devicetable-offsets.s
> HOSTCC scripts/mod/file2alias.o
> HOSTCC scripts/mod/sumversion.o
> HOSTLD scripts/mod/modpost
> CC kernel/bounds.s
> CC arch/x86/kernel/asm-offsets.s
> CALL scripts/checksyscalls.sh
> DESCEND objtool
> CC drivers/iio/chemical/bme680_spi.o
>
> Compiles without any issues.
>
> Also, wondering when is 0x77 i2c address used, since I tested
> this on 3 different boards with 0x76(when SDO is connected to GND)
>
> And why do I connect SDO to ground everytime ?
> It is because if SDO pin is left floating then I2C address will be
> undefined as said in datasheet + I have observed this while testing.
>
> Actallly, I don't understand what "VDIDO" is, as explained in the
> datasheet.
>
>
> Anyway, if the above compilation issue is not a problem, then
>
> Acked-by: Himanshu Jha <himanshujha199640@gmail.com>
>
>
> Thanks

\
 
 \ /
  Last update: 2019-01-12 19:26    [W:0.099 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site