Messages in this thread Patch in this message | | | From | "Andrew F. Davis" <> | Subject | [PATCH v2 2/2] ARM: dts: imx: Use new CODEC reset pin name | Date | Tue, 4 Sep 2018 09:20:18 -0500 |
| |
The correct DT property for specifying a GPIO used for reset is "reset-gpios", the driver now accepts this name use this here.
Signed-off-by: Andrew F. Davis <afd@ti.com> ---
Changes from v1: - Remove "fix" from commit message
arch/arm/boot/dts/imx6qdl-gw5903.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi index 368132274a91..ddabab168a8a 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi @@ -310,7 +310,7 @@ tlv320aic3105: codec@18 { compatible = "ti,tlv320aic3x"; reg = <0x18>; - gpio-reset = <&gpio5 17 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>; clocks = <&clks IMX6QDL_CLK_CKO>; ai3x-micbias-vg = <2>; /* MICBIAS_2_5V */ /* Regulators */ -- 2.18.0
| |