lkml.org 
[lkml]   [2018]   [Sep]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH net v2] r8169: always autoneg on resume
This affects at least versions 25 and 33, so assume all cards are broken
and just renegotiate by default.

Fixes: 10bc6a6042c9 ("r8169: fix autoneg issue on resume with RTL8168E")
Signed-off-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
---
drivers/net/ethernet/realtek/r8169.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index ab30aaeac6d3..db2f347c1463 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -4072,13 +4072,12 @@ static void rtl8169_init_phy(struct net_device *dev, struct rtl8169_private *tp)

genphy_soft_reset(dev->phydev);

- /* It was reported that chip version 33 ends up with 10MBit/Half on a
+ /* It was reported that several chips end up with 10MBit/Half on a
* 1GBit link after resuming from S3. For whatever reason the PHY on
- * this chip doesn't properly start a renegotiation when soft-reset.
+ * these chips doesn't properly start a renegotiation when soft-reset.
* Explicitly requesting a renegotiation fixes this.
*/
- if (tp->mac_version == RTL_GIGA_MAC_VER_33 &&
- dev->phydev->autoneg == AUTONEG_ENABLE)
+ if (dev->phydev->autoneg == AUTONEG_ENABLE)
phy_restart_aneg(dev->phydev);
}

--
2.19.0
\
 
 \ /
  Last update: 2018-09-30 17:07    [W:0.047 / U:0.524 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site