lkml.org 
[lkml]   [2018]   [Sep]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/9] AHCI and SATA PHY support for BCM63138
Date
Hi Kishon, Tejun,

This patch series adds support for the SATA AHCI and PHY found on the
ARM-basd BCM63138 DSL SoCs.

It would probably make sense for patches 1-3 to go through Kishon's
tree, patches 4-7 through Tejun's tree, and I would be merging the last
two patches through the Broadcom ARM-SoC tree.

Let me know if this is not a workable plan, thank you very much!

Florian Fainelli (9):
dt-bindings: phy: Document BCM63138 compatible string
phy: brcm-sata: allow PHY_BRCM_SATA driver to be built for DSL SoCs
phy: brcm-sata: Add BCM63138 (DSL) PHY init sequence
dt-bindings: ata: Document BCM63138 compatible string
ata: ahci_brcm: Allow optional reset controller to be used
ata: ahci_brcm: Match BCM63138 compatible strings
ata: ahci_brcm: Allow using driver or DSL SoCs
ARM: dts: BCM63xx: enable SATA PHY and AHCI controller
ARM: bcm63138: Enable SATA AHCI and PHY

.../bindings/ata/brcm,sata-brcm.txt | 1 +
.../devicetree/bindings/phy/brcm-sata-phy.txt | 1 +
arch/arm/boot/dts/bcm63138.dtsi | 30 ++++++++
arch/arm/boot/dts/bcm963138dvt.dts | 8 +++
drivers/ata/Kconfig | 3 +-
drivers/ata/ahci_brcm.c | 10 +++
drivers/phy/broadcom/Kconfig | 3 +-
drivers/phy/broadcom/phy-brcm-sata.c | 70 +++++++++++++++++++
8 files changed, 124 insertions(+), 2 deletions(-)

--
2.17.1

\
 
 \ /
  Last update: 2018-09-20 21:23    [W:0.175 / U:0.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site