Messages in this thread Patch in this message | | | From | Srinath Mannam <> | Subject | [PATCH v3 1/3] dt-bindings: thermal: Add binding document for SR thermal | Date | Thu, 9 Aug 2018 18:24:57 +0530 |
| |
From: Pramod Kumar <pramod.kumar@broadcom.com>
Add binding document for supported thermal implementation in Stingray.
Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com> Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> --- .../bindings/thermal/brcm,sr-thermal.txt | 23 ++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
diff --git a/Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt new file mode 100644 index 0000000..fc9e6d3 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt @@ -0,0 +1,23 @@ +* Broadcom Stingray Thermal + +This binding describes thermal sensors that is part of Stingray SoCs. + +Required properties: +- compatible : Must be "brcm,sr-thermal" +- reg : memory where tmon data will be available. +- brcm,tmon-mask: A one cell bit mask of valid TMON sources. + Each bit represents single TMON source. + +Example: + tmons { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x8f100000 0x100>; + + tmon: thermal@0 { + compatible = "brcm,sr-thermal"; + reg = <0 0x40>; + brcm,tmon-mask = <0x3f>; + }; + }; -- 2.7.4
| |