lkml.org 
[lkml]   [2018]   [Sep]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 0/3] Stingray thermal driver support
From
Date


On 08/09/18 05:54, Srinath Mannam wrote:
> These patches adds the stingray thermal driver and its
> corresponding DT nodes with documentation.
>
> Changes from v2:
> - All stingray TMON DT nodes are combine together into single.
> Temperature registers are combined into one mem resource.
> brcm,tmon-mask parameter has available TMONs mask value.
> - All available TMONs are initialized together in single
> instance of driver probe call.
>
> Changes from v1:
> - Fixed auto build sparce warning.

Thermal maintainers, can you please review patch #3? The binding and DTS
changes can go through arm-soc if you would like, or you can take
patches 1 and 3 and I take patch 2, either way is fine.

Thank you

>
> Pramod Kumar (3):
> dt-bindings: thermal: Add binding document for SR thermal
> arm64: dts: stingray: Add Stingray Thermal DT support.
> thermal: broadcom: Add Stingray thermal driver
>
> .../bindings/thermal/brcm,sr-thermal.txt | 23 +++
> .../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 13 ++
> drivers/thermal/Kconfig | 3 +-
> drivers/thermal/broadcom/Kconfig | 9 +
> drivers/thermal/broadcom/Makefile | 1 +
> drivers/thermal/broadcom/sr-thermal.c | 216 +++++++++++++++++++++
> 6 files changed, 264 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
> create mode 100644 drivers/thermal/broadcom/sr-thermal.c
>

--
Florian

\
 
 \ /
  Last update: 2018-09-14 00:26    [W:0.091 / U:0.880 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site