lkml.org 
[lkml]   [2018]   [Aug]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] ARM: dts: sunxi: Don't use cd-inverted in sun8i-r40-bananapi-m2-ultra
Date
Another user of cd-inverted seems to have crept in. Switch it away from
cd-inverted to be consistent with other sunxi boards.

Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
---
arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
index c39b9169ea64..a891a387e8f1 100644
--- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
+++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts
@@ -159,8 +159,7 @@
&mmc0 {
vmmc-supply = <&reg_dcdc1>;
bus-width = <4>;
- cd-gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
- cd-inverted;
+ cd-gpios = <&pio 7 13 GPIO_ACTIVE_LOW>; /* PH13 */
status = "okay";
};

--
2.16.3
\
 
 \ /
  Last update: 2018-08-08 01:26    [W:0.055 / U:0.380 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site