lkml.org 
[lkml]   [2018]   [Aug]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] pinctrl: uniphier: drop meaningless pin from SD1 pin-mux of Pro4
Date
The pin 327 was supposed to be used as a voltage control line for the
SD card regulator, but the SD card port1 does not support UHS-I. It
only supports 3.3V signaling, hence this pin is pointless.

Just a note about the background. At first, hardware engineers tried
to implement the UHS for this port. Then, they needed to shrink the
silicon die size, and gave up the UHS, but forgot to remove the pin
assignment.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---

drivers/pinctrl/uniphier/pinctrl-uniphier-pro4.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/pinctrl/uniphier/pinctrl-uniphier-pro4.c b/drivers/pinctrl/uniphier/pinctrl-uniphier-pro4.c
index 24788a7..b2c1ffe 100644
--- a/drivers/pinctrl/uniphier/pinctrl-uniphier-pro4.c
+++ b/drivers/pinctrl/uniphier/pinctrl-uniphier-pro4.c
@@ -1047,9 +1047,8 @@ static const unsigned nand_cs1_pins[] = {131, 132};
static const int nand_cs1_muxvals[] = {1, 1};
static const unsigned sd_pins[] = {150, 151, 152, 153, 154, 155, 156, 157, 158};
static const int sd_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0};
-static const unsigned sd1_pins[] = {319, 320, 321, 322, 323, 324, 325, 326,
- 327};
-static const int sd1_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0};
+static const unsigned int sd1_pins[] = {319, 320, 321, 322, 323, 324, 325, 326};
+static const int sd1_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0};
static const unsigned system_bus_pins[] = {25, 26, 27, 28, 29, 30, 31, 32, 33,
34, 35, 36, 37, 38};
static const int system_bus_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
--
2.7.4
\
 
 \ /
  Last update: 2018-08-07 04:52    [W:0.046 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site