lkml.org 
[lkml]   [2018]   [Aug]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/3] drm: rcar-du: Rename var to a more precise name
From
Date
Hi Jacopo,

Thankyou for the patch,

On 30/07/18 18:20, Jacopo Mondi wrote:
> Rename the 'value' variable, only used to for writing to DMSR register to a
> more precise 'dmsr' name.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
> ---
> drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> index 6d55cec..4d7907c 100644
> --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
> @@ -208,7 +208,7 @@ static void rcar_du_crtc_set_display_timing(struct rcar_du_crtc *rcrtc)
> const struct drm_display_mode *mode = &rcrtc->crtc.state->adjusted_mode;
> struct rcar_du_device *rcdu = rcrtc->group->dev;
> unsigned long mode_clock = mode->clock * 1000;
> - u32 value;
> + u32 dsmr;
> u32 escr;
>
> if (rcdu->info->dpll_ch & (1 << rcrtc->index)) {
> @@ -299,11 +299,11 @@ static void rcar_du_crtc_set_display_timing(struct rcar_du_crtc *rcrtc)
> rcar_du_group_write(rcrtc->group, rcrtc->index % 2 ? OTAR2 : OTAR, 0);
>
> /* Signal polarities */
> - value = ((mode->flags & DRM_MODE_FLAG_PVSYNC) ? DSMR_VSL : 0)
> - | ((mode->flags & DRM_MODE_FLAG_PHSYNC) ? DSMR_HSL : 0)
> - | ((mode->flags & DRM_MODE_FLAG_INTERLACE) ? DSMR_ODEV : 0)
> - | DSMR_DIPM_DISP | DSMR_CSPM;
> - rcar_du_crtc_write(rcrtc, DSMR, value);
> + dsmr = ((mode->flags & DRM_MODE_FLAG_PVSYNC) ? DSMR_VSL : 0)
> + | ((mode->flags & DRM_MODE_FLAG_PHSYNC) ? DSMR_HSL : 0)
> + | ((mode->flags & DRM_MODE_FLAG_INTERLACE) ? DSMR_ODEV : 0)
> + | DSMR_DIPM_DISP | DSMR_CSPM;

Quite nit-picky I'm afraid, but here, you have increased the indent such
that the '|' operator is now aligned with the first '(', rather than the
'=' as used by the rest of the driver.

Was this intentional ?

I think it should be brought forwards to align under the '=' to match.


> + rcar_du_crtc_write(rcrtc, DSMR, dsmr);
>
> /* Display timings */
> rcar_du_crtc_write(rcrtc, HDSR, mode->htotal - mode->hsync_start - 19);
>

\
 
 \ /
  Last update: 2018-08-06 17:50    [W:0.106 / U:0.516 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site