lkml.org 
[lkml]   [2018]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/2] add the Amlogic Meson PCIe controller driver
Date
The Amlogic Meson PCIe host controller is based on the Synopsys DesignWare
PCI core. This patchset add the driver and dt-bindings of the controller.

Till patch v2, we have a dedicated phy driver which only process reset job.
It's too overkill so we integrate phy driver into the controller.

Changes since v2: [1]
- abandon phy driver, move reset to the controller
- use devm_add_action_or_reset() to use clock res
- format correcting

Changes since v1: [0]
- use gpio lib instead open code
- move 'apb' and 'port' reset from phy driver
- format correcting

[0] : https://lkml.kernel.org/r/1534227522-186798-1-git-send-email-hanjie.lin@amlogic.com
[1] : https://lkml.kernel.org/r/1535096165-45827-1-git-send-email-hanjie.lin@amlogic.com

Yue Wang (2):
dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe
controller
PCI: meson: add the Amlogic Meson PCIe controller driver

.../devicetree/bindings/pci/amlogic,meson-pcie.txt | 70 +++
drivers/pci/controller/dwc/Kconfig | 12 +
drivers/pci/controller/dwc/Makefile | 1 +
drivers/pci/controller/dwc/pci-meson.c | 617 +++++++++++++++++++++
4 files changed, 700 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
create mode 100644 drivers/pci/controller/dwc/pci-meson.c

--
2.7.4

\
 
 \ /
  Last update: 2018-08-30 10:13    [W:0.039 / U:0.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site