lkml.org 
[lkml]   [2018]   [Aug]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 00/27] arm64: provide pseudo NMI with GICv3
From
Date


On 29/08/18 12:37, Daniel Thompson wrote:
> On Tue, Aug 28, 2018 at 04:51:10PM +0100, Julien Thierry wrote:
>> Hi,
>>
>> This series is a continuation of the work started by Daniel [1]. The goal
>> is to use GICv3 interrupt priorities to simulate an NMI.
>>
>> The patches depend on the core API for NMIs patches [2].
>
> As before... is there a git tree? With the NMI core API I think I might
> be able to get some of my old pseudo-NMI demos working.
>

Here is the git:

git://linux-arm.org/linux-jt.git v4.19-nmi-pmu-public

there are also a few patches to make the PMU interrupt into an NMI.

>
>> To achieve this, set two priorities, one for standard interrupts and
>> another, higher priority, for NMIs. Whenever we want to disable interrupts,
>> we mask the standard priority instead so NMIs can still be raised. Some
>> corner cases though still require to actually mask all interrupts
>> effectively disabling the NMI.
>>
>> Daniel Thompson ran some benchmarks [3] on the previous version showing a
>> small (<1%) performance drop when using interrupt priorities.
>
> IMHO it is very important to disclose which micro-architecture (in this
> case I think I was using C-A53 and GIC-500) the performance drop is
> observed with.
>
> We know from both micro- and macro-benchmarks that the performance delta
> is deeply dependant on core implementation. In fact, my own work in this
> area stalled largely because the main device that justified my spending
> working-hours on pseudo-NMI was too badly impacted to see it enabled by
> default.
>

Yes, you're right, I haven't had many boards to test on, the one I
tested on had 8 C-A57. Not sure about the GIC (it implemented GICv3
architecture, that's all I know). I had similar results to yours.

I did not have the opportunity to re-run the benchmarks on real hardware
for this spin however.

Thanks,

Julien

>
> Daniel.
>
>
>> Currently, only PPIs and SPIs can be set as NMIs. IPIs being currently
>> hardcoded IRQ numbers, there isn't a generic interface to set SGIs as NMI
>> for now. LPIs being controlled by the ITS cannot be delivered as NMI.
>> When an NMI is active on a CPU, no other NMI can be triggered on the CPU.
>>
>> Requirements to use this:
>> - Have GICv3
>> - SCR_EL3.FIQ is set to 1 when linux runs or have single security state
>> - Select Kernel Feature -> Use ICC system registers for IRQ masking
>>
>>
>> * Patches 1 to 3 aim at applying some alternatives early in the boot
>> process.
>>
>> * Patches 4 to 7 ensure the logic of daifflags remains valid
>> after arch_local_irq flags use ICC_PMR_EL1.
>>
>> * Patches 8 and 9 clean up GIC current priority definition to make it
>> easier to introduce a new priority
>>
>> * Patches 10 to 16 prepare arch code for the use of priorities, saving and
>> restoring ICC_PMR_EL1 appropriately
>>
>> * Patches 17 to 20 add the support to GICv3 driver to use priority masking
>> if required by the architecture
>>
>> * Patches 21 to 23 make arm64 code use ICC_PMR_EL1 to enable/disable
>> interrupts, leaving PSR.I as often as possible
>>
>> * Patches 24 to 27 add the support for NMIs to GICv3 driver
>>
>>
>> Changes since V4[4]:
>> * Rebased to v4.19-rc1
>> * Adapted GIC driver to the core NMI API
>> * Added option to disable priority masking on command line
>> * Added Daniel's Tested-by on patches related replacing PSR.I toggling with
>> PMR masking
>> * Fix scope matching for alternative features.
>> * Spotted some more places using PSR.I or daif and replaced with generic
>> interrupt functions
>>
>> Changes since V3[5]:
>> * Big refactoring. As suggested by Marc Z., some of the bigger patches
>> needed to be split into smaller one.
>> * Try to reduce the amount of #ifdef for the new feature by introducing
>> an individual cpufeature for priority masking
>> * Do not track which alternatives have been applied (was a bit dodgy
>> anyway), and use an alternative for VHE cpu_enable callback
>> * Fix a build failure with arm by adding the correct RPR accessors
>> * Added Suggested-by tags for changes from comming or inspired by Daniel's
>> series. Do let me know if you feel I missed something and am not giving
>> you due credit.
>>
>> Changes since V2[6]:
>> * Series rebase to v4.17-rc6
>> * Adapt pathces 1 and 2 to the rework of cpufeatures framework
>> * Use the group0 detection scheme in the GICv3 driver to identify
>> the priority view, and drop the use of a fake interrupt
>> * Add the case for a GIC configured in a single security state
>> * Use local_daif_restore instead of local_irq_enable the first time
>> we enable interrupts after a bp hardening in the handling of a kernel
>> entry. Otherwise PRS.I remains set...
>>
>> Changes since V1[7]:
>> * Series rebased to v4.15-rc8.
>> * Check for arm64_early_features in this_cpu_has_cap (spotted by Suzuki).
>> * Fix issue where debug exception were not masked when enabling debug in
>> mdscr_el1.
>>
>> Changes since RFC[8]:
>> * The series was rebased to v4.15-rc2 which implied some changes mainly
>> related to the work on exception entries and daif flags by James Morse.
>> - The first patch in the previous series was dropped because no longer
>> applicable.
>> - With the semantics James introduced of "inheriting" daif flags,
>> handling of PMR on exception entry is simplified as PMR is not altered
>> by taking an exception and already inherited from previous state.
>> - James pointed out that taking a PseudoNMI before reading the FAR_EL1
>> register should not be allowed as per the TRM (D10.2.29):
>> "FAR_EL1 is made UNKNOWN on an exception return from EL1."
>> So in this submission PSR.I bit is cleared only after FAR_EL1 is read.
>> * For KVM, only deal with PMR unmasking/restoring in common code, and VHE
>> specific code makes sure PSR.I bit is set when necessary.
>> * When detecting the GIC priority view (patch 5), wait for an actual
>> interrupt instead of trying only once.
>>
>>
>> [1] http://www.spinics.net/lists/arm-kernel/msg525077.html
>> [2] https://lkml.org/lkml/2018/8/28/661
>> [3] https://lkml.org/lkml/2018/7/20/803
>> [4] https://lkml.org/lkml/2018/7/24/321
>> [5] https://lkml.org/lkml/2018/5/21/276
>> [6] https://lkml.org/lkml/2018/1/17/335
>> [7] https://www.spinics.net/lists/arm-kernel/msg620763.html
>> [8] https://www.spinics.net/lists/arm-kernel/msg610736.html
>>
>> Cheers,
>>
>> Julien
>>
>> -->
>>
>> Daniel Thompson (1):
>> arm64: alternative: Apply alternatives early in boot process
>>
>> Julien Thierry (26):
>> arm64: cpufeature: Set SYSREG_GIC_CPUIF as a boot system feature
>> arm64: cpufeature: Use alternatives for VHE cpu_enable
>> arm64: daifflags: Use irqflags functions for daifflags
>> arm64: Use daifflag_restore after bp_hardening
>> arm64: Delay daif masking for user return
>> arm64: xen: Use existing helper to check interrupt status
>> irqchip/gic: Unify GIC priority definitions
>> irqchip/gic: Lower priority of GIC interrupts
>> arm64: cpufeature: Add cpufeature for IRQ priority masking
>> arm64: Make PMR part of task context
>> arm64: Unmask PMR before going idle
>> arm/arm64: gic-v3: Add helper functions to manage IRQ priorities
>> arm64: kvm: Unmask PMR before entering guest
>> arm64: irqflags: Use ICC_PMR_EL1 for interrupt masking
>> arm64: daifflags: Include PMR in daifflags restore operations
>> irqchip/gic-v3: Factor group0 detection into functions
>> irqchip/gic-v3: Do not overwrite PMR value
>> irqchip/gic-v3: Remove acknowledge loop
>> irqchip/gic-v3: Switch to PMR masking after IRQ acknowledge
>> arm64: Switch to PMR masking when starting CPUs
>> arm64: Add build option for IRQ masking via priority
>> arm64: Handle serror in NMI context
>> irqchip/gic-v3: Detect current view of GIC priorities
>> irqchip/gic-v3: Add base support for pseudo-NMI
>> irqchip/gic: Add functions to access irq priorities
>> irqchip/gic-v3: Allow interrupts to be set as pseudo-NMI
>>
>> Documentation/admin-guide/kernel-parameters.txt | 3 +
>> Documentation/arm64/booting.txt | 5 +
>> arch/arm/include/asm/arch_gicv3.h | 33 +++
>> arch/arm64/Kconfig | 15 ++
>> arch/arm64/include/asm/alternative.h | 3 +-
>> arch/arm64/include/asm/arch_gicv3.h | 33 +++
>> arch/arm64/include/asm/assembler.h | 17 +-
>> arch/arm64/include/asm/cpucaps.h | 3 +-
>> arch/arm64/include/asm/cpufeature.h | 2 +
>> arch/arm64/include/asm/daifflags.h | 29 ++-
>> arch/arm64/include/asm/efi.h | 3 +-
>> arch/arm64/include/asm/irqflags.h | 100 +++++++--
>> arch/arm64/include/asm/kvm_host.h | 12 +
>> arch/arm64/include/asm/processor.h | 1 +
>> arch/arm64/include/asm/ptrace.h | 13 +-
>> arch/arm64/include/asm/xen/events.h | 2 +-
>> arch/arm64/kernel/alternative.c | 28 ++-
>> arch/arm64/kernel/asm-offsets.c | 1 +
>> arch/arm64/kernel/cpufeature.c | 51 ++++-
>> arch/arm64/kernel/entry.S | 63 +++++-
>> arch/arm64/kernel/head.S | 35 +++
>> arch/arm64/kernel/process.c | 2 +
>> arch/arm64/kernel/smp.c | 12 +
>> arch/arm64/kernel/traps.c | 8 +-
>> arch/arm64/kvm/hyp/switch.c | 17 ++
>> arch/arm64/mm/fault.c | 5 +-
>> arch/arm64/mm/proc.S | 18 ++
>> drivers/irqchip/irq-gic-common.c | 10 +
>> drivers/irqchip/irq-gic-common.h | 2 +
>> drivers/irqchip/irq-gic-v3-its.c | 2 +-
>> drivers/irqchip/irq-gic-v3.c | 279 +++++++++++++++++++-----
>> include/linux/irqchip/arm-gic-common.h | 6 +
>> include/linux/irqchip/arm-gic.h | 5 -
>> 33 files changed, 699 insertions(+), 119 deletions(-)
>>
>> --
>> 1.9.1

--
Julien Thierry

\
 
 \ /
  Last update: 2018-08-29 14:59    [W:0.720 / U:23.800 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site