lkml.org 
[lkml]   [2018]   [Aug]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 2/6] mmc: tmio: move tmio_mmc_set_clock() to platform hook
Date
tmio_mmc_set_clock() is full of quirks because different SoC vendors
extended this in different ways.

The original IP defines the divisor range 1/2 ... 1/512.

bit 7 is set: 1/512
bit 6 is set: 1/256
...
bit 0 is set: 1/4
all bits clear: 1/2

It is platform-dependent how to achieve the 1/1 clock.

I guess the TMIO-MFD variant uses the clock selector outside of this IP,
as far as I see tmio_core_mmc_clk_div() in drivers/mfd/tmio_core.c

I guess bit[7:0]=0xff is Renesas-specific extension.

Socionext (and Panasonic) uses bit 10 (CLKSEL) for 1/1. Also, newer
versions of UniPhier SoC variants use bit 16 for 1/1024.

host->clk_update() is only used by the Renesas variants, whereas
host->set_clk_div() is only used by the TMIO-MFD variants.

To cope with this mess, promote tmio_mmc_set_clock() to a new
platform hook ->set_clock(), and melt the old two hooks into it.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---

Changes in v3:
- Rebase

Changes in v2: None

drivers/mmc/host/renesas_sdhi_core.c | 62 +++++++++++++++++++++++-
drivers/mmc/host/tmio_mmc.c | 48 +++++++++++++++++++
drivers/mmc/host/tmio_mmc.h | 4 +-
drivers/mmc/host/tmio_mmc_core.c | 92 +++---------------------------------
4 files changed, 117 insertions(+), 89 deletions(-)

diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c
index 777e32b..cb6e889 100644
--- a/drivers/mmc/host/renesas_sdhi_core.c
+++ b/drivers/mmc/host/renesas_sdhi_core.c
@@ -155,6 +155,66 @@ static unsigned int renesas_sdhi_clk_update(struct tmio_mmc_host *host,
return ret == 0 ? best_freq : clk_get_rate(priv->clk);
}

+static void renesas_sdhi_clk_start(struct tmio_mmc_host *host)
+{
+ sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, CLK_CTL_SCLKEN |
+ sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
+
+ /* HW engineers overrode docs: no sleep needed on R-Car2+ */
+ if (!(host->pdata->flags & TMIO_MMC_MIN_RCAR2))
+ usleep_range(10000, 11000);
+}
+
+static void renesas_sdhi_clk_stop(struct tmio_mmc_host *host)
+{
+ sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN &
+ sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
+
+ /* HW engineers overrode docs: no sleep needed on R-Car2+ */
+ if (!(host->pdata->flags & TMIO_MMC_MIN_RCAR2))
+ usleep_range(10000, 11000);
+}
+
+static void renesas_sdhi_set_clock(struct tmio_mmc_host *host,
+ unsigned int new_clock)
+{
+ u32 clk = 0, clock;
+
+ if (new_clock == 0) {
+ renesas_sdhi_clk_stop(host);
+ return;
+ }
+ /*
+ * Both HS400 and HS200/SD104 set 200MHz, but some devices need to
+ * set 400MHz to distinguish the CPG settings in HS400.
+ */
+ if (host->mmc->ios.timing == MMC_TIMING_MMC_HS400 &&
+ host->pdata->flags & TMIO_MMC_HAVE_4TAP_HS400 &&
+ new_clock == 200000000)
+ new_clock = 400000000;
+
+ clock = renesas_sdhi_clk_update(host, new_clock) / 512;
+
+ for (clk = 0x80000080; new_clock >= (clock << 1); clk >>= 1)
+ clock <<= 1;
+
+ /* 1/1 clock is option */
+ if ((host->pdata->flags & TMIO_MMC_CLK_ACTUAL) && ((clk >> 22) & 0x1)) {
+ if (!(host->mmc->ios.timing == MMC_TIMING_MMC_HS400))
+ clk |= 0xff;
+ else
+ clk &= ~0xff;
+ }
+
+ sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN &
+ sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
+ sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & CLK_CTL_DIV_MASK);
+ if (!(host->pdata->flags & TMIO_MMC_MIN_RCAR2))
+ usleep_range(10000, 11000);
+
+ renesas_sdhi_clk_start(host);
+}
+
static void renesas_sdhi_clk_disable(struct tmio_mmc_host *host)
{
struct renesas_sdhi *priv = host_to_priv(host);
@@ -620,8 +680,8 @@ int renesas_sdhi_probe(struct platform_device *pdev,

host->write16_hook = renesas_sdhi_write16_hook;
host->clk_enable = renesas_sdhi_clk_enable;
- host->clk_update = renesas_sdhi_clk_update;
host->clk_disable = renesas_sdhi_clk_disable;
+ host->set_clock = renesas_sdhi_set_clock;
host->multi_io_quirk = renesas_sdhi_multi_io_quirk;
host->dma_ops = dma_ops;

diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
index 43a2ea5..b031a77 100644
--- a/drivers/mmc/host/tmio_mmc.c
+++ b/drivers/mmc/host/tmio_mmc.c
@@ -13,6 +13,7 @@
* published by the Free Software Foundation.
*/

+#include <linux/delay.h>
#include <linux/device.h>
#include <linux/mfd/core.h>
#include <linux/mfd/tmio.h>
@@ -23,6 +24,52 @@

#include "tmio_mmc.h"

+static void tmio_mmc_clk_start(struct tmio_mmc_host *host)
+{
+ sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, CLK_CTL_SCLKEN |
+ sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
+
+ usleep_range(10000, 11000);
+ sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0100);
+ usleep_range(10000, 11000);
+}
+
+static void tmio_mmc_clk_stop(struct tmio_mmc_host *host)
+{
+ sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0000);
+ usleep_range(10000, 11000);
+
+ sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN &
+ sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
+
+ usleep_range(10000, 11000);
+}
+
+static void tmio_mmc_set_clock(struct tmio_mmc_host *host,
+ unsigned int new_clock)
+{
+ u32 clk = 0, clock;
+
+ if (new_clock == 0) {
+ tmio_mmc_clk_stop(host);
+ return;
+ }
+
+ clock = host->mmc->f_min;
+
+ for (clk = 0x80000080; new_clock >= (clock << 1); clk >>= 1)
+ clock <<= 1;
+
+ host->pdata->set_clk_div(host->pdev, (clk >> 22) & 1);
+
+ sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN &
+ sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
+ sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & CLK_CTL_DIV_MASK);
+ usleep_range(10000, 11000);
+
+ tmio_mmc_clk_start(host);
+}
+
#ifdef CONFIG_PM_SLEEP
static int tmio_mmc_suspend(struct device *dev)
{
@@ -100,6 +147,7 @@ static int tmio_mmc_probe(struct platform_device *pdev)

/* SD control register space size is 0x200, 0x400 for bus_shift=1 */
host->bus_shift = resource_size(res) >> 10;
+ host->set_clock = tmio_mmc_set_clock;

host->mmc->f_max = pdata->hclk;
host->mmc->f_min = pdata->hclk / 512;
diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index 5d141f7..e6aa13a 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -133,7 +133,6 @@ struct tmio_mmc_host {

/* Callbacks for clock / power control */
void (*set_pwr)(struct platform_device *host, int state);
- void (*set_clk_div)(struct platform_device *host, int state);

/* pio related stuff */
struct scatterlist *sg_ptr;
@@ -170,10 +169,9 @@ struct tmio_mmc_host {

/* Mandatory callback */
int (*clk_enable)(struct tmio_mmc_host *host);
+ void (*set_clock)(struct tmio_mmc_host *host, unsigned int clock);

/* Optional callbacks */
- unsigned int (*clk_update)(struct tmio_mmc_host *host,
- unsigned int new_clock);
void (*clk_disable)(struct tmio_mmc_host *host);
int (*multi_io_quirk)(struct mmc_card *card,
unsigned int direction, int blk_size);
diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c
index 5717ffa..0611824 100644
--- a/drivers/mmc/host/tmio_mmc_core.c
+++ b/drivers/mmc/host/tmio_mmc_core.c
@@ -160,83 +160,6 @@ static void tmio_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
}
}

-static void tmio_mmc_clk_start(struct tmio_mmc_host *host)
-{
- sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, CLK_CTL_SCLKEN |
- sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
-
- /* HW engineers overrode docs: no sleep needed on R-Car2+ */
- if (!(host->pdata->flags & TMIO_MMC_MIN_RCAR2))
- usleep_range(10000, 11000);
-
- if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG) {
- sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0100);
- usleep_range(10000, 11000);
- }
-}
-
-static void tmio_mmc_clk_stop(struct tmio_mmc_host *host)
-{
- if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG) {
- sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0000);
- usleep_range(10000, 11000);
- }
-
- sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN &
- sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
-
- /* HW engineers overrode docs: no sleep needed on R-Car2+ */
- if (!(host->pdata->flags & TMIO_MMC_MIN_RCAR2))
- usleep_range(10000, 11000);
-}
-
-static void tmio_mmc_set_clock(struct tmio_mmc_host *host,
- unsigned int new_clock)
-{
- u32 clk = 0, clock;
-
- if (new_clock == 0) {
- tmio_mmc_clk_stop(host);
- return;
- }
- /*
- * Both HS400 and HS200/SD104 set 200MHz, but some devices need to
- * set 400MHz to distinguish the CPG settings in HS400.
- */
- if (host->mmc->ios.timing == MMC_TIMING_MMC_HS400 &&
- host->pdata->flags & TMIO_MMC_HAVE_4TAP_HS400 &&
- new_clock == 200000000)
- new_clock = 400000000;
-
- if (host->clk_update)
- clock = host->clk_update(host, new_clock) / 512;
- else
- clock = host->mmc->f_min;
-
- for (clk = 0x80000080; new_clock >= (clock << 1); clk >>= 1)
- clock <<= 1;
-
- /* 1/1 clock is option */
- if ((host->pdata->flags & TMIO_MMC_CLK_ACTUAL) &&
- ((clk >> 22) & 0x1)) {
- if (!(host->mmc->ios.timing == MMC_TIMING_MMC_HS400))
- clk |= 0xff;
- else
- clk &= ~0xff;
- }
-
- if (host->set_clk_div)
- host->set_clk_div(host->pdev, (clk >> 22) & 1);
-
- sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN &
- sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
- sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & CLK_CTL_DIV_MASK);
- if (!(host->pdata->flags & TMIO_MMC_MIN_RCAR2))
- usleep_range(10000, 11000);
-
- tmio_mmc_clk_start(host);
-}
-
static void tmio_mmc_reset(struct tmio_mmc_host *host)
{
/* FIXME - should we set stop clock reg here */
@@ -1043,15 +966,15 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
switch (ios->power_mode) {
case MMC_POWER_OFF:
tmio_mmc_power_off(host);
- tmio_mmc_set_clock(host, 0);
+ host->set_clock(host, 0);
break;
case MMC_POWER_UP:
tmio_mmc_power_on(host, ios->vdd);
- tmio_mmc_set_clock(host, ios->clock);
+ host->set_clock(host, ios->clock);
tmio_mmc_set_bus_width(host, ios->bus_width);
break;
case MMC_POWER_ON:
- tmio_mmc_set_clock(host, ios->clock);
+ host->set_clock(host, ios->clock);
tmio_mmc_set_bus_width(host, ios->bus_width);
break;
}
@@ -1237,7 +1160,7 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host)
int ret;

/*
- * Check the sanity of mmc->f_min to prevent tmio_mmc_set_clock() from
+ * Check the sanity of mmc->f_min to prevent host->set_clock() from
* looping forever...
*/
if (mmc->f_min == 0)
@@ -1247,7 +1170,6 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host)
_host->write16_hook = NULL;

_host->set_pwr = pdata->set_pwr;
- _host->set_clk_div = pdata->set_clk_div;

ret = tmio_mmc_init_ocr(_host);
if (ret < 0)
@@ -1310,7 +1232,7 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host)
if (pdata->flags & TMIO_MMC_SDIO_IRQ)
_host->sdio_irq_mask = TMIO_SDIO_MASK_ALL;

- tmio_mmc_set_clock(_host, 0);
+ _host->set_clock(_host, 0);
tmio_mmc_reset(_host);

_host->sdcard_irq_mask = sd_ctrl_read16_and_16_as_32(_host, CTL_IRQ_MASK);
@@ -1394,7 +1316,7 @@ int tmio_mmc_host_runtime_suspend(struct device *dev)
tmio_mmc_disable_mmc_irqs(host, TMIO_MASK_ALL);

if (host->clk_cache)
- tmio_mmc_set_clock(host, 0);
+ host->set_clock(host, 0);

tmio_mmc_clk_disable(host);

@@ -1415,7 +1337,7 @@ int tmio_mmc_host_runtime_resume(struct device *dev)
tmio_mmc_clk_enable(host);

if (host->clk_cache)
- tmio_mmc_set_clock(host, host->clk_cache);
+ host->set_clock(host, host->clk_cache);

if (host->native_hotplug)
tmio_mmc_enable_mmc_irqs(host,
--
2.7.4
\
 
 \ /
  Last update: 2018-08-23 06:45    [W:0.912 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site