Messages in this thread |  | | Date | Tue, 21 Aug 2018 15:08:26 -0700 | From | Bjorn Andersson <> | Subject | Re: [PATCH 1/4] dt-bindings: reset: Add PDC reset binding for SDM845 SoCs |
| |
On Fri 27 Jul 08:28 PDT 2018, Sibi Sankar wrote:
> Add SDM845 PDC (Power Domain Controller) reset controller binding >
Even though this is currently describing only a reset controller I think this binding better be talking about the "PDC Global" hardware.
> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> > --- > .../bindings/reset/qcom,pdc-reset.txt | 52 +++++++++++++++++++ > include/dt-bindings/reset/qcom,sdm845-pdc.h | 20 +++++++ > 2 files changed, 72 insertions(+) > create mode 100644 Documentation/devicetree/bindings/reset/qcom,pdc-reset.txt > create mode 100644 include/dt-bindings/reset/qcom,sdm845-pdc.h > > diff --git a/Documentation/devicetree/bindings/reset/qcom,pdc-reset.txt b/Documentation/devicetree/bindings/reset/qcom,pdc-reset.txt
Rename this qcom,pdc-global to match the compatible, and hardware name.
> new file mode 100644 > index 000000000000..85e159962e08 > --- /dev/null > +++ b/Documentation/devicetree/bindings/reset/qcom,pdc-reset.txt > @@ -0,0 +1,52 @@ > +PDC Reset Controller
PDC Global
> +====================================== > + > +This binding describes a reset-controller found on PDC-Global(Power Domain > +Controller) block for Qualcomm Technologies Inc SDM845 SoCs.
This looks good.
> + > +Required properties: > +- compatible: > + Usage: required > + Value type: <string> > + Definition: must be: > + "qcom,sdm845-pdc-global" > + > +- reg: > + Usage: required > + Value type: <prop-encoded-array> > + Definition: must specify the base address and size of the register > + space. > + > +- #reset-cells: > + Usage: required > + Value type: <uint> > + Definition: must be 1; cell entry represents the reset index. > + > +Example: > + > +pdc_reset: reset-controller@b2e0000 {
This is perfectly fine, in its current form it is a reset-controller.
> + compatible = "qcom,sdm845-pdc-global"; > + reg = <0xb2e0000 0x20000>; > + #reset-cells = <1>; > +}; > +
Apart from this, the binding looks good!
Regards, Bjorn
|  |