lkml.org 
[lkml]   [2018]   [Aug]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] dt-bindings: input: pwm-vibrator: correct pwm-names in example
Date
In the example for the pwm-vibrator bindings, pwm8 is the direction pin,
and pwm9 is the enable pin. The pwm-names on the vibrator node has these
two values swapped. This patch corrects the values for pwm-names.

Signed-off-by: Brian Masney <masneyb@onstation.org>
---
arch/arm/boot/dts/omap4-droid4-xt894.dts is actual implementation for
the example and it is correct.

Documentation/devicetree/bindings/input/pwm-vibrator.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/input/pwm-vibrator.txt b/Documentation/devicetree/bindings/input/pwm-vibrator.txt
index 09145d18491d..2731cbb7e8d7 100644
--- a/Documentation/devicetree/bindings/input/pwm-vibrator.txt
+++ b/Documentation/devicetree/bindings/input/pwm-vibrator.txt
@@ -60,7 +60,7 @@ Example from Motorola Droid 4:
compatible = "pwm-vibrator";
pwms = <&pwm8 0 1000000000 0>,
<&pwm9 0 1000000000 0>;
- pwm-names = "enable", "direction";
+ pwm-names = "direction", "enable";
direction-duty-cycle-ns = <1000000000>;
};
};
--
2.17.1
\
 
 \ /
  Last update: 2018-08-18 22:00    [W:0.031 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site