lkml.org 
[lkml]   [2018]   [Jul]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] i2c: designware: Add support for a bus clock
On Tue, Jul 17, 2018 at 02:57:27PM +0000, Phil Edworthy wrote:
> Hi Andy,
>
> On 17 July 2018 15:47, Andy Shevchenko wrote:
> > On Tue, 2018-07-17 at 14:40 +0000, Phil Edworthy wrote:
> > > On 17 July 2018 15:19, Andy Shevchenko wrote:
> > > > On Tue, 2018-07-17 at 12:42 +0000, Phil Edworthy wrote:
> > > >
> > > > > > While your point sounds valid (don't remember how clk_get() is
> > > > > > implemented), NULL is also OK to have.
> > > > >
> > > > > Ok as in there is no bus clock, right?
> > > > > So it should be:
> > > > > if (!IS_ERR_OR_NULL (dev->busclk))
> > > >
> > > > Nope, NULL is no error case for optional clock.
> > >
> > > I must be missing something here...
> >
> > See how clk_prepare_enable() is implemented.
> Ok, if busclk is NULL the code can safely call clk_prepare_enable()
>
> > > I agree that NULL for an optional clock is not an error. However, the
> > > code above is now:
> > > + if (prepare) {
> > > + /* Optional bus clock */
> >
> > > + if (!IS_ERR_OR_NULL(dev->busclk)) {
> >
> > Check for NULL is redundant.
> >
> > > + ret = clk_prepare_enable(dev->busclk);
> > > + if (ret)
> > > + return ret;
> > > + }
> > > +
> > > return clk_prepare_enable(dev->clk);
> > > + }
> > >
> > > So, if you have a valid busclk, it gets enabled, otherwise it is left
> > > alone.
> >
> So the code as sent in the original email is correct (aside from Geert's
> comments about EPROBE_DEFER handling).
>
> Maybe I need some coffee :\
> Thanks
> Phil

My point is that errors should be treated as errors.

In i2c_dw_prepare_clk() the following appears:

if (IS_ERR(dev->clk))
return PTR_ERR(dev->clk);

So dev->clk being an error value is treated as an error that
is passed up to the caller.

But in your patch (and the snippet below) dev->busclk is treated
as the optional clock not being present. Even if the error stored
nothing to do with the clock not being present - f.e. ENOMEM or
as Geert mentioned elsewhere, EPROBE_DEFER.

Assuming the absense of the optional clock is indicated by ENOENT,
in my view correct code would include something like:

...

if (IS_ERR(dev->clk))
return PTR_ERR(dev->clk);

if (IS_ERR(dev->buslck) && PTR_ERR(dev->busclk) != -ENOENT)
return PTR_ERR(dev->busclk);

...


\
 
 \ /
  Last update: 2018-07-18 11:15    [W:0.066 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site