lkml.org 
[lkml]   [2018]   [Jun]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 18/24] drm/sun4i: DW HDMI PHY: Add support for second PLL
Date
Some DW HDMI PHYs, like those found in A64 and R40 SoCs, can select
between two clock parents.

Add code which reads second PLL from DT.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h | 2 ++
drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 20 +++++++++++++++-----
2 files changed, 17 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
index 3ba71aff92fc..46a3aa6a53a9 100644
--- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
+++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h
@@ -147,6 +147,7 @@ struct sun8i_hdmi_phy;

struct sun8i_hdmi_phy_variant {
bool has_phy_clk;
+ bool has_second_pll;
void (*phy_init)(struct sun8i_hdmi_phy *phy);
void (*phy_disable)(struct dw_hdmi *hdmi,
struct sun8i_hdmi_phy *phy);
@@ -160,6 +161,7 @@ struct sun8i_hdmi_phy {
struct clk *clk_mod;
struct clk *clk_phy;
struct clk *clk_pll0;
+ struct clk *clk_pll1;
unsigned int rcal;
struct regmap *regs;
struct reset_control *rst_phy;
diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
index e56b9e5b1c42..f0877b3f67e7 100644
--- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
+++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
@@ -482,10 +482,19 @@ int sun8i_hdmi_phy_probe(struct sun8i_dw_hdmi *hdmi, struct device_node *node)
goto err_put_clk_mod;
}

+ if (phy->variant->has_second_pll) {
+ phy->clk_pll1 = of_clk_get_by_name(node, "pll-1");
+ if (IS_ERR(phy->clk_pll1)) {
+ dev_err(dev, "Could not get pll-1 clock\n");
+ ret = PTR_ERR(phy->clk_pll1);
+ goto err_put_clk_pll0;
+ }
+ }
+
ret = sun8i_phy_clk_create(phy, dev);
if (ret) {
dev_err(dev, "Couldn't create the PHY clock\n");
- goto err_put_clk_pll0;
+ goto err_put_clk_pll1;
}

clk_prepare_enable(phy->clk_phy);
@@ -528,9 +537,10 @@ int sun8i_hdmi_phy_probe(struct sun8i_dw_hdmi *hdmi, struct device_node *node)
reset_control_put(phy->rst_phy);
err_disable_clk_phy:
clk_disable_unprepare(phy->clk_phy);
+err_put_clk_pll1:
+ clk_put(phy->clk_pll1);
err_put_clk_pll0:
- if (phy->variant->has_phy_clk)
- clk_put(phy->clk_pll0);
+ clk_put(phy->clk_pll0);
err_put_clk_mod:
clk_put(phy->clk_mod);
err_put_clk_bus:
@@ -551,8 +561,8 @@ void sun8i_hdmi_phy_remove(struct sun8i_dw_hdmi *hdmi)

reset_control_put(phy->rst_phy);

- if (phy->variant->has_phy_clk)
- clk_put(phy->clk_pll0);
+ clk_put(phy->clk_pll0);
+ clk_put(phy->clk_pll1);
clk_put(phy->clk_mod);
clk_put(phy->clk_bus);
}
--
2.18.0
\
 
 \ /
  Last update: 2018-06-25 14:07    [W:0.313 / U:0.384 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site