lkml.org 
[lkml]   [2018]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] drivers/tty: add error handling for pcmcia_loop_config
Date
When pcmcia_loop_config fails, the lack of error-handling code may
cause unexpected results.

This patch adds error-handling code after calling pcmcia_loop_config.

Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com>
---
drivers/tty/serial/8250/serial_cs.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/8250/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c
index 9963a76..c8186a0 100644
--- a/drivers/tty/serial/8250/serial_cs.c
+++ b/drivers/tty/serial/8250/serial_cs.c
@@ -638,8 +638,10 @@ static int serial_config(struct pcmcia_device *link)
(link->has_func_id) &&
(link->socket->pcmcia_pfc == 0) &&
((link->func_id == CISTPL_FUNCID_MULTI) ||
- (link->func_id == CISTPL_FUNCID_SERIAL)))
- pcmcia_loop_config(link, serial_check_for_multi, info);
+ (link->func_id == CISTPL_FUNCID_SERIAL))) {
+ if (pcmcia_loop_config(link, serial_check_for_multi, info))
+ goto failed;
+ }

/*
* Apply any multi-port quirk.
--
2.7.4
\
 
 \ /
  Last update: 2018-06-12 06:37    [W:0.122 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site